Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: .715 Ball loads

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Double Rifles, Single Shots & Combinations >> Paradox and Bore Guns

DarylS
.700 member

Reged: 10/08/05
Posts: 27000
Loc: Beautiful British Columbia, Ca...

Re: .715 Ball loads
10/03/08 03:42 AM

It is the 'cup' that you want off the wad - nothing else- everything else is garbage - toss it - The cup off the bottom is the gas check. It is put cup-down to seal the powder, and one is put facing cup-up to centre the ball. All trap wads I've seen have a concave gas check seal on the bottom of the wad. I am not sure what you are talking about - flat? flat what?. Put one cup down on the powder, then the right size cushion wad for crimp height overall, then another gas check cup(OFF A WAD) with the concave facing up, to centre the ball in the bore.
; The nominal size for 12 bore is .729". Mnay today are overbored or back-bored to larger sizes, even to .740". One must slug the bore to find out what it is if you want to use the largest ball possible. The weigth goes up quickly.
; Your shotgun doesn't know the difference between a 525gr. slug and a 537gr. ball. Then, there's the weigth of the wads, length of bearing surfaces causing friction, etc. It is best to start low, of course, as you have, but you can probably work up to 1,450fps easily. THAT's a powerful load.
; It may only be 2,508FPE, but on Taylor's KO chart, it's 79.5. A .300 Ultra Mag develops a whole 27.7KO roughly 1/3rd of the real power. 1450fps is 100fps higher than the moderate, more extensively used African load for the 12 bore BP cape guns and rifles produces.

--------------------
Daryl

"a gun without hammers is like a Spaniel without ears" King George V

Post Extras

Print Post

Remind Me!

Notify Moderator

Entire topic
Subject	Posted by	Posted on
.715 Ball loads	Alberta	17/01/08 09:21 AM
Re: .715 Ball loads	jaz	20/01/08 02:20 AM
Re: .715 Ball loads	DarylS	20/01/08 05:43 AM
Re: .715 Ball loads	Alberta	20/01/08 01:26 PM
Re: .715 Ball loads	DarylS	21/01/08 07:27 AM
Re: .715 Ball loads	beleg2	22/01/08 08:59 AM
Re: .715 Ball loads	DarylS	05/02/08 04:24 AM
Re: .715 Ball loads	beleg2	10/02/08 12:19 PM
Re: .715 Ball loads	Alberta	08/03/08 01:46 PM
Re: .715 Ball loads	DarylS	09/03/08 02:22 AM
Re: .715 Ball loads	Alberta	09/03/08 06:41 AM
Re: .715 Ball loads	DarylS	10/03/08 03:42 AM
Re: .715 Ball loads	Alberta	10/03/08 08:00 AM
Re: .715 Ball loads	DarylS	10/03/08 11:47 AM
Re: .715 Ball loads	DarylS	23/01/08 05:30 AM
Re: .715 Ball loads	beleg2	23/01/08 11:46 AM
Re: .715 Ball loads	DarylS	24/01/08 05:52 AM
Re: .715 Ball loads	beleg2	24/01/08 06:34 AM
Re: .715 Ball loads	DarylS	25/01/08 04:25 AM
Re: .715 Ball loads	Marrakai	25/01/08 11:12 PM
Re: .715 Ball loads	DarylS	26/01/08 02:25 AM
Re: .715 Ball loads	Sarg	26/01/08 08:35 AM
Re: .715 Ball loads	DarylS	27/01/08 06:08 AM
Re: .715 Ball loads	beleg2	31/01/08 12:35 PM
Re: .715 Ball loads	DarylS	01/02/08 04:29 AM
Re: .715 Ball loads	88MauSporter	01/02/08 05:50 AM
Re: .715 Ball loads	DarylS	01/02/08 10:24 AM
Re: .715 Ball loads	88MauSporter	01/02/08 02:02 PM
Re: .715 Ball loads	DarylS	02/02/08 01:56 AM
Re: .715 Ball loads	88MauSporter	02/02/08 02:53 AM
Re: .715 Ball loads	9.3x57	17/01/08 12:27 PM

Extra information

0 registered and 41 anonymous users are browsing this forum.

Moderator: tinker

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 9289

Jump to

NitroExpress.com

Powered by UBB.threads™ 6.5.5

Home | Ezine | Forums | Links | Contact

Copyright 2003 to 2011 - all rights reserved