Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: .360 2-1/4" Brass wanted

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Rifles

Sparky
.224 member

Reged: 02/03/08
Posts: 14
Loc: Idaho, USA

Re: .360 2-1/4" Brass wanted
03/03/08 10:07 AM

.360 2 1/4 cases were available at www.buffaloarms.com made from Rem 30-40 Krag brass, but not listed in last catalog. I have 160+ .360 2 1/4 cases I made from Rem 30-40 Krag brass that has .053" rim thickness instead of .046 as most of the books state. After I made these cases I found the chambers in my Wm. Moore & Grey are 2 5/16", so I made new longer ones. The base dia. is .434" witch slightly larger than the books call out. These cases have been fired about 4 times with BP ,washed & cleaned with walnut hulls. They are for sale.

Post Extras

Entire topic
Subject	Posted by	Posted on
.360 2-1/4" Brass wanted	1980E26	12/02/06 05:01 AM
Re: .360 2-1/4" Brass wanted	Sandgroper	08/10/07 08:19 PM
Re: .360 2-1/4" Brass wanted	Sparky	03/03/08 10:07 AM

Extra information

0 registered and 16 anonymous users are browsing this forum.

Moderator:

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 2361

Jump to

NitroExpress.com

Home | Ezine | Forums | Links | Contact