Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: SMLE ejection problem

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Rifles

Marrakai
.416 member

Reged: 09/01/03
Posts: 3612
Loc: Darwin, Top End of Australia

Re: SMLE ejection problem
09/02/08 08:20 PM

Depending on the action mark...

There should be a short screw protruding through the LHS of the action, which acts as the kicker to toss out the fired case. The outer left side of the rim should hit against it a half-inch or so before the bolt is fully rearward, and stop. This is what throws the case out. Often they become worn or burred over and produce the result you are experiencing.

This may not be it, but worth checking before going further. Remedy is to replace the screw.

--------------------
Marrakai
When the bull drops, the bullshit stops!
--------------------------------
www.marrakai-adventure.com.au

Post Extras

Entire topic
Subject	Posted by	Posted on
SMLE ejection problem	wombat	09/02/08 06:12 PM
Re: SMLE ejection problem	Marrakai	09/02/08 08:20 PM
Re: SMLE ejection problem	9.3x57	10/02/08 12:34 AM
Re: SMLE ejection problem	wombat	10/02/08 11:18 AM

Extra information

0 registered and 178 anonymous users are browsing this forum.

Moderator:

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 2438

Jump to

NitroExpress.com

Home | Ezine | Forums | Links | Contact