Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: .715 Ball loads

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Double Rifles, Single Shots & Combinations >> Paradox and Bore Guns

DarylS
.700 member

Reged: 10/08/05
Posts: 27000
Loc: Beautiful British Columbia, Ca...

Re: .715 Ball loads
27/01/08 06:08 AM

Oh yeah - I could hunt happily with that rifle - moose and bear and of course, deer, caribou, elk - you name it.
: With round ball, the case should hold 100gr. to 110gr. 2F, with an Oxyoke lubed wad beneath the ball. While the powder charges are a bit soft of the charge I'd use in a flintlock muzzleloading rifle, it would suffice in the ctg. gun, without vent pressure loss. The round ball will probably be the most acurate as the twist rate is probably better suited to round ball than slug. If the twist is measured at 48" or faster, either will work. The extra weight of powder with round ball over factory loaded ammo with slug should help replace the recoil generated by the factory load - helping with regulation. It may even hold 120gr.2F - the more the merrier for trajectory and penetration. Too, WW alloy balls could be used for even greater penetration. This would become an excellent non-dangerous game rifle, with bears included.
: My buddies did good work indeed with cloth patched round balls in their 12 bore shotshells - so this also is a consideration for the Snider or smoothbore as the case may be - that is, an undersized ball, cloth patched to take up the windage. In this case, a card wad should be beneath the patched ball to protect the powder from becoming wet from the patch. Hoppe's #9 PLUS is about as good as anything for this use. Note #9 "PLUS". This is a BP solvent. Nitro solvents don't soften nor mix with black powder residue and therefore foul badly. If using one of he fakes, it's up to you, I have little experience with these but still used BP solvents for lube.

--------------------
Daryl

"a gun without hammers is like a Spaniel without ears" King George V

Post Extras

Print Post

Remind Me!

Notify Moderator

Entire topic
Subject	Posted by	Posted on
.715 Ball loads	Alberta	17/01/08 09:21 AM
Re: .715 Ball loads	jaz	20/01/08 02:20 AM
Re: .715 Ball loads	DarylS	20/01/08 05:43 AM
Re: .715 Ball loads	Alberta	20/01/08 01:26 PM
Re: .715 Ball loads	DarylS	21/01/08 07:27 AM
Re: .715 Ball loads	beleg2	22/01/08 08:59 AM
Re: .715 Ball loads	DarylS	05/02/08 04:24 AM
Re: .715 Ball loads	beleg2	10/02/08 12:19 PM
Re: .715 Ball loads	Alberta	08/03/08 01:46 PM
Re: .715 Ball loads	DarylS	09/03/08 02:22 AM
Re: .715 Ball loads	Alberta	09/03/08 06:41 AM
Re: .715 Ball loads	DarylS	10/03/08 03:42 AM
Re: .715 Ball loads	Alberta	10/03/08 08:00 AM
Re: .715 Ball loads	DarylS	10/03/08 11:47 AM
Re: .715 Ball loads	DarylS	23/01/08 05:30 AM
Re: .715 Ball loads	beleg2	23/01/08 11:46 AM
Re: .715 Ball loads	DarylS	24/01/08 05:52 AM
Re: .715 Ball loads	beleg2	24/01/08 06:34 AM
Re: .715 Ball loads	DarylS	25/01/08 04:25 AM
Re: .715 Ball loads	Marrakai	25/01/08 11:12 PM
Re: .715 Ball loads	DarylS	26/01/08 02:25 AM
Re: .715 Ball loads	Sarg	26/01/08 08:35 AM
Re: .715 Ball loads	DarylS	27/01/08 06:08 AM
Re: .715 Ball loads	beleg2	31/01/08 12:35 PM
Re: .715 Ball loads	DarylS	01/02/08 04:29 AM
Re: .715 Ball loads	88MauSporter	01/02/08 05:50 AM
Re: .715 Ball loads	DarylS	01/02/08 10:24 AM
Re: .715 Ball loads	88MauSporter	01/02/08 02:02 PM
Re: .715 Ball loads	DarylS	02/02/08 01:56 AM
Re: .715 Ball loads	88MauSporter	02/02/08 02:53 AM
Re: .715 Ball loads	9.3x57	17/01/08 12:27 PM

Extra information

0 registered and 54 anonymous users are browsing this forum.

Moderator: tinker

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 9290

Jump to

NitroExpress.com

Powered by UBB.threads™ 6.5.5

Home | Ezine | Forums | Links | Contact

Copyright 2003 to 2011 - all rights reserved