Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: .715 Ball loads

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Double Rifles, Single Shots & Combinations >> Paradox and Bore Guns

Marrakai
.416 member

Reged: 09/01/03
Posts: 3592
Loc: Darwin, Top End of Australia

Re: .715 Ball loads
25/01/08 11:12 PM

Daryl:
Not too many Sniders actually have a 'normal' .585" groove diameter. My 3-bander is .598, and would digest .600 RBs happily if the cartridge neck still had clearance (it doesn't, and there lies the problem with most original Sniders).

Snider bores must be slugged, and then the real fun begins trying to fit a groove-diameter projectile in the case neck in such a way that it will chamber with safe clearance for neck expansion when fired. The Brits settled on undersized hollow-base projectiles with all manner of expander-plugs fitted, a poor solution accuracy-wise. The guys over on the MH forums load the Coyote heeled bullet (like a .22 rimfire), which appears to be the best solution short of opening up the chamber.

The other solution is to load the ball into the chamber first, followed by a shortened case full of powder closed with a wad (essentially a 'blank').

Hope this doesn't take us too far off topic....

--------------------
Marrakai
When the bull drops, the bullshit stops!
--------------------------------
www.marrakai-adventure.com.au

Post Extras

Print Post

Remind Me!

Notify Moderator

Entire topic
Subject	Posted by	Posted on
.715 Ball loads	Alberta	17/01/08 09:21 AM
Re: .715 Ball loads	jaz	20/01/08 02:20 AM
Re: .715 Ball loads	DarylS	20/01/08 05:43 AM
Re: .715 Ball loads	Alberta	20/01/08 01:26 PM
Re: .715 Ball loads	DarylS	21/01/08 07:27 AM
Re: .715 Ball loads	beleg2	22/01/08 08:59 AM
Re: .715 Ball loads	DarylS	05/02/08 04:24 AM
Re: .715 Ball loads	beleg2	10/02/08 12:19 PM
Re: .715 Ball loads	Alberta	08/03/08 01:46 PM
Re: .715 Ball loads	DarylS	09/03/08 02:22 AM
Re: .715 Ball loads	Alberta	09/03/08 06:41 AM
Re: .715 Ball loads	DarylS	10/03/08 03:42 AM
Re: .715 Ball loads	Alberta	10/03/08 08:00 AM
Re: .715 Ball loads	DarylS	10/03/08 11:47 AM
Re: .715 Ball loads	DarylS	23/01/08 05:30 AM
Re: .715 Ball loads	beleg2	23/01/08 11:46 AM
Re: .715 Ball loads	DarylS	24/01/08 05:52 AM
Re: .715 Ball loads	beleg2	24/01/08 06:34 AM
Re: .715 Ball loads	DarylS	25/01/08 04:25 AM
Re: .715 Ball loads	Marrakai	25/01/08 11:12 PM
Re: .715 Ball loads	DarylS	26/01/08 02:25 AM
Re: .715 Ball loads	Sarg	26/01/08 08:35 AM
Re: .715 Ball loads	DarylS	27/01/08 06:08 AM
Re: .715 Ball loads	beleg2	31/01/08 12:35 PM
Re: .715 Ball loads	DarylS	01/02/08 04:29 AM
Re: .715 Ball loads	88MauSporter	01/02/08 05:50 AM
Re: .715 Ball loads	DarylS	01/02/08 10:24 AM
Re: .715 Ball loads	88MauSporter	01/02/08 02:02 PM
Re: .715 Ball loads	DarylS	02/02/08 01:56 AM
Re: .715 Ball loads	88MauSporter	02/02/08 02:53 AM
Re: .715 Ball loads	9.3x57	17/01/08 12:27 PM

Extra information

0 registered and 36 anonymous users are browsing this forum.

Moderator: tinker

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 9289

Jump to

NitroExpress.com

Powered by UBB.threads™ 6.5.5

Home | Ezine | Forums | Links | Contact

Copyright 2003 to 2011 - all rights reserved