Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: .715 Ball loads

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Double Rifles, Single Shots & Combinations >> Paradox and Bore Guns

DarylS
.700 member

Reged: 10/08/05
Posts: 27000
Loc: Beautiful British Columbia, Ca...

Re: .715 Ball loads
24/01/08 05:52 AM

Martin - is your 16 bore choked?
; If it's choked, measure the tightest spot and use a ball as close to that as possible.
; The .570" ball, about 270gr. weight, is commonly used in 24 bore rifles and is a mite small for the 16 bore shotgun.
; I suspect a 20 bore ball might be better sized and much heavier. The 16's nominal size is around .665" or .675". Lyman makes a .662" RB mould. Even with a full choke, the .665" bore would reduce to .625", leaving all the moulds in the .600" to .625" range open for use. Lee makes a cheap RB mould in a couple sizes in between these. .600" and .610" at least. These balls weigh in the 320gr. weight range.
: As the bore size gets smaller, I tend to look toward the heaviest ball I can use in that bore. In a choked gun, that would be whatever 'just' fit the choke.
; If you are stuck with the 24 bore ball, OK, use it, but don't be surprised with the lack of smashing power we've come to expect from the larger bores.
: In actuality, the .570" ball will probably do just fine for most game this side of Africa.
; One thing's for certain, with a bit of handloading work(and a chronograph), you could get some prety fine speeds with that light a ball.

--------------------
Daryl

"a gun without hammers is like a Spaniel without ears" King George V

Post Extras

Print Post

Remind Me!

Notify Moderator

Entire topic
Subject	Posted by	Posted on
.715 Ball loads	Alberta	17/01/08 09:21 AM
Re: .715 Ball loads	jaz	20/01/08 02:20 AM
Re: .715 Ball loads	DarylS	20/01/08 05:43 AM
Re: .715 Ball loads	Alberta	20/01/08 01:26 PM
Re: .715 Ball loads	DarylS	21/01/08 07:27 AM
Re: .715 Ball loads	beleg2	22/01/08 08:59 AM
Re: .715 Ball loads	DarylS	05/02/08 04:24 AM
Re: .715 Ball loads	beleg2	10/02/08 12:19 PM
Re: .715 Ball loads	Alberta	08/03/08 01:46 PM
Re: .715 Ball loads	DarylS	09/03/08 02:22 AM
Re: .715 Ball loads	Alberta	09/03/08 06:41 AM
Re: .715 Ball loads	DarylS	10/03/08 03:42 AM
Re: .715 Ball loads	Alberta	10/03/08 08:00 AM
Re: .715 Ball loads	DarylS	10/03/08 11:47 AM
Re: .715 Ball loads	DarylS	23/01/08 05:30 AM
Re: .715 Ball loads	beleg2	23/01/08 11:46 AM
Re: .715 Ball loads	DarylS	24/01/08 05:52 AM
Re: .715 Ball loads	beleg2	24/01/08 06:34 AM
Re: .715 Ball loads	DarylS	25/01/08 04:25 AM
Re: .715 Ball loads	Marrakai	25/01/08 11:12 PM
Re: .715 Ball loads	DarylS	26/01/08 02:25 AM
Re: .715 Ball loads	Sarg	26/01/08 08:35 AM
Re: .715 Ball loads	DarylS	27/01/08 06:08 AM
Re: .715 Ball loads	beleg2	31/01/08 12:35 PM
Re: .715 Ball loads	DarylS	01/02/08 04:29 AM
Re: .715 Ball loads	88MauSporter	01/02/08 05:50 AM
Re: .715 Ball loads	DarylS	01/02/08 10:24 AM
Re: .715 Ball loads	88MauSporter	01/02/08 02:02 PM
Re: .715 Ball loads	DarylS	02/02/08 01:56 AM
Re: .715 Ball loads	88MauSporter	02/02/08 02:53 AM
Re: .715 Ball loads	9.3x57	17/01/08 12:27 PM

Extra information

0 registered and 36 anonymous users are browsing this forum.

Moderator: tinker

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 9289

Jump to

NitroExpress.com

Powered by UBB.threads™ 6.5.5

Home | Ezine | Forums | Links | Contact

Copyright 2003 to 2011 - all rights reserved