Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: .715 Ball loads

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Double Rifles, Single Shots & Combinations >> Paradox and Bore Guns

DarylS
.700 member

Reged: 10/08/05
Posts: 27000
Loc: Beautiful British Columbia, Ca...

Re: .715 Ball loads
20/01/08 05:43 AM

Alberta- you need to pick up a Lyman shotshell loading book. There are a bunch of loads you can use for base data for developing your own data.
; They list loads form .690" balls to 575gr. Brenneke slugs- in most years of manuals.
; You can extropolate from that data. Always start at the starting load or a few grains (weight) of powder lower.
; A chronograph is useful when developing data.
; Once you get those .715" balls (545gr. in pure lead) to the 1,450fps to 1,500fps range, you'll have close to the equivalence of the 7 dram BP 12 bore load.
; The suggestion of Unique is a good one, but quite soft.
; I'd start around 24gr. and go from there.
: Most ball loads with 7625 and 4756 will end up in the 30gr. to slighlty higher range - BUT - should start around 24.0gr. - whatever is safe with a shot charge of the same weight. The ball will develope slightly lower pressure.
: Remember to use a gas check off a trap of other wad to centre the ball - cup up, of course and one, cup-down on the powder - fibre wads in the middle. Lyman also has some suggestions.

--------------------
Daryl

"a gun without hammers is like a Spaniel without ears" King George V

Post Extras

Print Post

Remind Me!

Notify Moderator

Entire topic
Subject	Posted by	Posted on
.715 Ball loads	Alberta	17/01/08 09:21 AM
Re: .715 Ball loads	jaz	20/01/08 02:20 AM
Re: .715 Ball loads	DarylS	20/01/08 05:43 AM
Re: .715 Ball loads	Alberta	20/01/08 01:26 PM
Re: .715 Ball loads	DarylS	21/01/08 07:27 AM
Re: .715 Ball loads	beleg2	22/01/08 08:59 AM
Re: .715 Ball loads	DarylS	05/02/08 04:24 AM
Re: .715 Ball loads	beleg2	10/02/08 12:19 PM
Re: .715 Ball loads	Alberta	08/03/08 01:46 PM
Re: .715 Ball loads	DarylS	09/03/08 02:22 AM
Re: .715 Ball loads	Alberta	09/03/08 06:41 AM
Re: .715 Ball loads	DarylS	10/03/08 03:42 AM
Re: .715 Ball loads	Alberta	10/03/08 08:00 AM
Re: .715 Ball loads	DarylS	10/03/08 11:47 AM
Re: .715 Ball loads	DarylS	23/01/08 05:30 AM
Re: .715 Ball loads	beleg2	23/01/08 11:46 AM
Re: .715 Ball loads	DarylS	24/01/08 05:52 AM
Re: .715 Ball loads	beleg2	24/01/08 06:34 AM
Re: .715 Ball loads	DarylS	25/01/08 04:25 AM
Re: .715 Ball loads	Marrakai	25/01/08 11:12 PM
Re: .715 Ball loads	DarylS	26/01/08 02:25 AM
Re: .715 Ball loads	Sarg	26/01/08 08:35 AM
Re: .715 Ball loads	DarylS	27/01/08 06:08 AM
Re: .715 Ball loads	beleg2	31/01/08 12:35 PM
Re: .715 Ball loads	DarylS	01/02/08 04:29 AM
Re: .715 Ball loads	88MauSporter	01/02/08 05:50 AM
Re: .715 Ball loads	DarylS	01/02/08 10:24 AM
Re: .715 Ball loads	88MauSporter	01/02/08 02:02 PM
Re: .715 Ball loads	DarylS	02/02/08 01:56 AM
Re: .715 Ball loads	88MauSporter	02/02/08 02:53 AM
Re: .715 Ball loads	9.3x57	17/01/08 12:27 PM

Extra information

0 registered and 54 anonymous users are browsing this forum.

Moderator: tinker

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 9290

Jump to

NitroExpress.com

Powered by UBB.threads™ 6.5.5

Home | Ezine | Forums | Links | Contact

Copyright 2003 to 2011 - all rights reserved