Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: Help needed on 8x57IR

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Double Rifles, Single Shots & Combinations >> Single Shots & Combination Guns

xausa
.400 member

Reged: 07/03/07
Posts: 2037
Loc: Tennessee, USA

Re: Help needed on 8x57IR
07/01/08 03:13 PM

8X57IR and 8X57JR are the same and both use the .318" bullet. The S (.323") bullets are loaded in cases with black primers in Europe to distinguish them from the "J" and "JR" ammunition. All the American factory loads, as far as I know, are loaded with the .323" bullets.

You're fortunate to have such a drilling at your disposal. I have a Sauer Model 26, which is a side lock drilling with separate rifle barrel cocking by means of a lever on the left side of the action. Cocking the rifle lock shifts the front trigger to fire the rifle barrel, and after firing the rifle barrel, or uncocking the rifle lock, the trigger must be returned to shot by means of a tiny button located adjacent to it.

Post Extras

Entire topic
Subject	Posted by	Posted on
Help needed on 8x57IR	kcordell	07/01/08 03:01 PM
Re: Help needed on 8x57IR	luv2safari	12/01/08 03:21 PM
Re: Help needed on 8x57IR	CptCurl	12/01/08 11:19 PM
Re: Help needed on 8x57IR	9.3x57	13/01/08 02:07 AM
Re: Help needed on 8x57IR	kcordell	14/01/08 01:58 PM
Re: Help needed on 8x57IR	xausa	07/01/08 03:13 PM
Re: Help needed on 8x57IR	kcordell	07/01/08 03:51 PM
Re: Help needed on 8x57IR	luv2safari	12/01/08 03:16 PM
Re: Help needed on 8x57IR	xausa	12/01/08 04:41 PM
Re: Help needed on 8x57IR	Taylor416	09/01/08 11:55 PM

Extra information

0 registered and 97 anonymous users are browsing this forum.

Moderator: Huvius

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 5689

Jump to

NitroExpress.com

Home | Ezine | Forums | Links | Contact