Home | Ezine | Forums | Links | Contact
NitroExpress.com: Double Rifle Frame Size

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Double Rifles, Single Shots & Combinations >> Double Rifles

DUGABOY1
.400 member


Reged: 02/02/03
Posts: 1340
Loc: TEXAS USA
Re: Double Rifle Frame Size
      19/12/07 12:08 PM

Quote:

Are the Merkels built on 20 gauge shotgun actions or are the 20 gauge shotguns built on Double Rifle actions?




Mick, you are on to the facts here! The actions used in building Merkel side by side double rifles are heat-treated for use with double rifles, and are pleanty strong for that purpose! The actions are two sizes, the 20 ga size, is used for the 375 H&H, the 416 Rigby, 470NE, and the 500NE! That one is also used for the smaller rounds as well in the model 140-1 from the 9.3X74R down! The 28 ga size is used in the new 141-1 for the 9.3X74R down. These are 20 ga, and 28 ga SIZE only, and are rifle actions. The S/S shotguns are made on these same rifle actions. The reasoning for this is simple, by doing this there is no need to make different action for rifle, and shotgun, requireing different heat-treating, and so both are machined the same for the CNC. A simple cost cutting move, with no down side, IMO!


Quote:

All classes of cartridges should be built on an action appropriate to their size. One size does not fit all if you want a nicely balanced rifle. A 375 built on the same size action as a 470 results in either a big clubby 375 or a 470 on too light a frame.




Again, IMO, as long as you keep the 1/3 weight in the middle between the hands, it makes no difference what action you use as long as it is strong enough for the cartridge chambered in it, as longas the proper weight distribution is maintained between the hands. The weight can be adjusted for the 375, in the same as the 470NE action by simply makeing the barrels for the 375 slimmer. Where Merkel has bombed is with the 500NE, by not makeing the barrel walls a little thicker, to take back the steel lost by boreing a larger hole for the 500NE.

I know lots of people who own and have shot the heck out of every chambering that Merkel chambers, and I have not heard of even one Merkel coming off face. I'm not saying it hasn't happened, because it may have, but I'd bet my next retirement check, it was caused by someone overloading one of the 375H&H, or 416 Rigbys, and/or improper care. Still, I doubt it is anything but internet legend, started by someone who couldn't compete with Merkel's price point!

..............All just my opinion, however!

--------------------
..........Mac >>>===(x)===>
DUGABOY1, and MacD37 founding member of DRSS www.doublerifleshooterssociety.com
"If I die today, I have had a life well spent, for I've been to see the Elephant, and smelled the smoke of Africa!"

Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* Double Rifle Frame Size 4seventy 22/03/04 10:32 PM
. * * Re: Double Rifle Frame Size 500grains   25/03/04 05:25 PM
. * * Re: Double Rifle Frame Size ThomasEdwards   26/03/04 01:13 PM
. * * Re: Double Rifle Frame Size 500grains   26/03/04 02:32 PM
. * * Re: Double Rifle Frame Size mickey   27/03/04 11:22 AM
. * * Re: Double Rifle Frame Size DUGABOY1   19/12/07 12:08 PM
. * * Re: Double Rifle Frame Size hoppdoc   19/12/07 02:23 PM
. * * Re: Double Rifle Frame Size docEE   26/03/04 12:23 PM
. * * Re: Double Rifle Frame Size 4seventy   27/03/04 08:21 AM
. * * Re: Double Rifle Frame Size mickey   28/03/04 06:13 AM
. * * Re: Double Rifle Frame Size 4seventy   29/03/04 07:33 AM
. * * Re: Double Rifle Frame Size mickey   19/12/07 09:22 AM
. * * Re: Double Rifle Frame Size 4seventy   19/12/07 08:57 PM
. * * Re: Double Rifle Frame Size ArnoldB   20/12/07 05:22 AM
. * * Re: Double Rifle Frame Size 4seventy   25/03/04 08:33 AM
. * * Re: Double Rifle Frame Size mickey   25/03/04 12:30 PM

Extra information
0 registered and 505 anonymous users are browsing this forum.

Moderator:  CptCurl 



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 3691

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved