Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: 9.3 x ??? question

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Mauser Discussion Forum

DarylS
.700 member

Reged: 10/08/05
Posts: 26992
Loc: Beautiful British Columbia, Ca...

Re: 9.3 x ??? question
05/12/07 09:51 AM

One thing people tend to do when turning necks, is to make them fit the chamber necks more closely than factory brass of that size is. Tighter fitting necks, of course, means the turning tolerances must be tighter as well. I was referring to inside reaming to turn the brass into factory spec. neck thickness for that round, which would be on the order of .010" to .012" thickness.
; Runout is more often caused by dies bending the brass during sizing, rather than by neck thickening.
; The time to check brass runnout on the outside of the necks and case neck thickness with a ball mic is just after firing. That will tell you if the necks are out of sync and therefore runnout is bad as a result. I've done a lot of case forming and not had trouble with thickening necks.
; .358 Winchster brass is easily made from .308, 7mm/08, .260 Rem. and .243 brass, without needing to turn or ream, ever. It's cheap enough that $50.00 or $60.00 worth will last a lifetime, well, almost, when you include range pick-ups.

--------------------
Daryl

"a gun without hammers is like a Spaniel without ears" King George V

Post Extras

Print Post

Remind Me!

Notify Moderator

Entire topic
Subject	Posted by	Posted on
9.3 x ??? question	GoneShootin	27/11/07 12:18 PM
Re: 9.3 x ??? question	9.3x57	28/11/07 01:21 AM
Re: 9.3 x ??? question	GoneShootin	29/11/07 07:51 PM
Re: 9.3 x ??? question	Paul	29/11/07 11:30 PM
Re: 9.3 x ??? question	CptCurl	30/11/07 01:05 PM
Re: 9.3 x ??? question	9.3x57	30/11/07 01:53 PM
Re: 9.3 x ??? question	CptCurl	02/12/07 01:13 PM
Re: 9.3 x ??? question	DarylS	03/12/07 05:31 AM
Re: 9.3 x ??? question	Nakihunter	03/12/07 04:14 PM
Re: 9.3 x ??? question	DarylS	04/12/07 05:18 AM
Re: 9.3 x ??? question	DarylS	04/12/07 05:30 AM
Re: 9.3 x ??? question	Nakihunter	04/12/07 10:55 AM
Re: 9.3 x ??? question	9.3x57	04/12/07 01:35 PM
Re: 9.3 x ??? question	DarylS	04/12/07 01:50 PM
Re: 9.3 x ??? question	Nakihunter	04/12/07 09:00 PM
Re: 9.3 x ??? question	DarylS	05/12/07 03:28 AM
Re: 9.3 x ??? question	Nakihunter	05/12/07 08:26 AM
Re: 9.3 x ??? question	CptCurl	05/12/07 09:52 AM
Re: 9.3 x ??? question	9.3x57	05/12/07 01:43 PM
Re: 9.3 x ??? question	DarylS	05/12/07 09:55 AM
Re: 9.3 x ??? question	DarylS	05/12/07 09:51 AM
Re: 9.3 x ??? question	CptCurl	03/12/07 10:28 PM
Re: 9.3 x ??? question	9.3x57	04/12/07 12:28 AM
Re: 9.3 x ??? question	capoward	02/12/07 02:39 PM
Re: 9.3 x ??? question	9.3x57	02/12/07 05:38 PM
Re: 9.3 x ??? question	GoneShootin	03/12/07 12:06 AM
Re: 9.3 x ??? question	Nakihunter	30/11/07 02:40 PM
Re: 9.3 x ??? question	pjaln	01/12/07 01:50 PM
Re: 9.3 x ??? question	Nakihunter	27/11/07 04:15 PM

Extra information

0 registered and 31 anonymous users are browsing this forum.

Moderator: NitroX

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 12446

Jump to

NitroExpress.com

Powered by UBB.threads™ 6.5.5

Home | Ezine | Forums | Links | Contact

Copyright 2003 to 2011 - all rights reserved