Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: 9.3 x ??? question

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Mauser Discussion Forum

capoward
.224 member

Reged: 09/08/07
Posts: 12
Loc: Southern California, USA

Re: 9.3 x ??? question
02/12/07 02:39 PM

OK, I’ll bite.

Model 98 Mauser small ring actions have the following in common: a 1.300in / 3.302cm ring diameter and a .980in / 2.4892cm barrel shank. They are further broken down by action length: standard length being 7.835in / 19.9009cm between receiver screws, the intermediate length being 7.620in / 19.3548cm between receiver screws, and the true short being 7.225in / 18.35149cm between receiver screws.

M98 Mauser Small Ring Standard Length Actions:
3.315in / 8.4201cm internal magazine length
Commercial Husqvarna, Commercial Oberndorf, KAR98, G33-40, VZ33, and VZ47 Commercial Brno/Czechoslovakia
3.340in / 8.4836cm internal magazine length
VG47 Commercial Brno/Czechoslovakia

M98 Mauser Small Ring Intermediate Length Actions:
3.118in / 7.91972cm internal magazine length
M1910 Mexican FN/Mexico and M1936 Mexican FN/Mexico

M98 Mauser True Short Length Action:
2.725in / 6.9215cm internal magazine length
Commercial KURZ [this action is extremely rare]

If your M98 Mauser small ring action is in good mechanical shape without safety flaws; e.g., over-grinding of ring diameter to remove military caches or over-grinding of the feed ramp to fit .375 H&H Magnum length cartridges, it should handle any .532 case diameter or smaller case diameter cartridge that will fit and function within it’s action and magazine length limitations if the cartridge is loaded within CIP CUP or CIP PSI pressure limits.

Magazine capacity should be 5-down with the 9.3x62 and 3-down with the 9.3x64.

I support the proposition that a competent gunsmith should inspect all surplus military actions for safety issues and perform action alterations to the feeding ramps, and bolt face if needed, if the action is being re-barreled to a cartridge case other than the original specification case, as well as re-barreling the action.

Post Extras

Print Post

Remind Me!

Notify Moderator

Entire topic
Subject	Posted by	Posted on
9.3 x ??? question	GoneShootin	27/11/07 12:18 PM
Re: 9.3 x ??? question	9.3x57	28/11/07 01:21 AM
Re: 9.3 x ??? question	GoneShootin	29/11/07 07:51 PM
Re: 9.3 x ??? question	Paul	29/11/07 11:30 PM
Re: 9.3 x ??? question	CptCurl	30/11/07 01:05 PM
Re: 9.3 x ??? question	9.3x57	30/11/07 01:53 PM
Re: 9.3 x ??? question	CptCurl	02/12/07 01:13 PM
Re: 9.3 x ??? question	DarylS	03/12/07 05:31 AM
Re: 9.3 x ??? question	Nakihunter	03/12/07 04:14 PM
Re: 9.3 x ??? question	DarylS	04/12/07 05:18 AM
Re: 9.3 x ??? question	DarylS	04/12/07 05:30 AM
Re: 9.3 x ??? question	Nakihunter	04/12/07 10:55 AM
Re: 9.3 x ??? question	9.3x57	04/12/07 01:35 PM
Re: 9.3 x ??? question	DarylS	04/12/07 01:50 PM
Re: 9.3 x ??? question	Nakihunter	04/12/07 09:00 PM
Re: 9.3 x ??? question	DarylS	05/12/07 03:28 AM
Re: 9.3 x ??? question	Nakihunter	05/12/07 08:26 AM
Re: 9.3 x ??? question	CptCurl	05/12/07 09:52 AM
Re: 9.3 x ??? question	9.3x57	05/12/07 01:43 PM
Re: 9.3 x ??? question	DarylS	05/12/07 09:55 AM
Re: 9.3 x ??? question	DarylS	05/12/07 09:51 AM
Re: 9.3 x ??? question	CptCurl	03/12/07 10:28 PM
Re: 9.3 x ??? question	9.3x57	04/12/07 12:28 AM
Re: 9.3 x ??? question	capoward	02/12/07 02:39 PM
Re: 9.3 x ??? question	9.3x57	02/12/07 05:38 PM
Re: 9.3 x ??? question	GoneShootin	03/12/07 12:06 AM
Re: 9.3 x ??? question	Nakihunter	30/11/07 02:40 PM
Re: 9.3 x ??? question	pjaln	01/12/07 01:50 PM
Re: 9.3 x ??? question	Nakihunter	27/11/07 04:15 PM

Extra information

0 registered and 94 anonymous users are browsing this forum.

Moderator: NitroX

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 11538

Jump to

NitroExpress.com

Powered by UBB.threads™ 6.5.5

Home | Ezine | Forums | Links | Contact

Copyright 2003 to 2011 - all rights reserved