Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: Breaking In New Rifle

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Rifles

Mike_McGuire
.333 member

Reged: 11/06/05
Posts: 348
Loc: Sydney Australia

Re: Breaking In New Rifle
25/09/07 07:04 PM

You can and will get lots of disagreement on "breaking in" BUT everyone will agree that the barrel of a new rifle should be cleaned before shooting so as to remove the greases/oils etc that the factory put in the barrel.

As to following shots I do the following:

If the barrel is stainless I fire a few shots then:

Clean out the powder fouling with Hoppes and brush or similar then dry out the Hoppes and then with a patch on the ramrod put Sweets 7.62 into the bore. Leave for about 5 minutes. Dry out the Sweets and the patch will probably have a bluis green colour, then run Hoppes through the bore and then dry out the Hoppes and then shoot again. I might repeat this every 5 shots or so for about 20 shots.

Don't leave Sweets in for too long and don;t shoot the rifle without removing the Sweets.

If the barrel is Chrome Moly I only clean powder fouling out after I have finished shooting, depending on calibre and number of shots. I don't bother cleaning copper fouling out of Chrome Moly barrels as I think it is better left there. Others will disagree. If the calibre is small but has a larger case capacity such as 22/250, 243, 257 Wby etc them I might clean the powder fouling out after 20 shots or so. For big bores with small capacity for the bore size such as 375 H&H, 458 Win I would only clean out the barrel after I finish shooting.

Having said of all that the vital thing is to clean out the factory barrel protection before shooting.

After you have fired 3 or 4 shots tighten the action screws. The front screw shoul be tightened quite hard and the rear screw not tightened up to much.....somewhere between being "nipped up" and very tight.

Mike

Post Extras

Print Post

Remind Me!

Notify Moderator

Entire topic
Subject	Posted by	Posted on
Breaking In New Rifle	AussieHunter	25/09/07 04:32 PM
Re: Breaking In New Rifle	Ripp	16/12/07 01:26 AM
Re: Breaking In New Rifle	Tatume	16/12/07 02:33 AM
Re: Breaking In New Rifle	Ripp	16/12/07 05:40 AM
Re: Breaking In New Rifle	Nakihunter	16/12/07 10:28 AM
Re: Breaking In New Rifle	KM4	20/12/07 05:34 PM
Re: Breaking In New Rifle	9.3x57	21/12/07 01:09 AM
Re: Breaking In New Rifle	Ripp	21/12/07 03:56 AM
Re: Breaking In New Rifle	Huvius	21/12/07 02:44 AM
Re: Breaking In New Rifle	JabaliHunter	21/12/07 03:17 AM
Re: Breaking In New Rifle	Ripp	16/12/07 11:12 AM
Re: Breaking In New Rifle	GoneShootin	16/12/07 02:09 PM
Re: Breaking In New Rifle	zimhunter	26/09/07 06:32 AM
Re: Breaking In New Rifle	Tatume	26/09/07 07:30 AM
Re: Breaking In New Rifle	xausa	26/09/07 08:10 AM
Re: Breaking In New Rifle	Tatume	26/09/07 10:15 PM
Re: Breaking In New Rifle	zimhunter	27/09/07 01:50 AM
Re: Breaking In New Rifle	Ripp	15/12/07 12:53 AM
Re: Breaking In New Rifle	Tatume	15/12/07 01:10 AM
Re: Breaking In New Rifle	Ripp	15/12/07 01:28 AM
Re: Breaking In New Rifle	gryphon	15/12/07 06:38 AM
Re: Breaking In New Rifle	Nakihunter	15/12/07 10:25 AM
Re: Breaking In New Rifle	Ripp	15/12/07 12:03 PM
Re: Breaking In New Rifle	DarylS	15/12/07 05:58 PM
Re: Breaking In New Rifle	Ripp	16/12/07 05:32 AM
Re: Breaking In New Rifle	Ripp	16/12/07 12:44 AM
Re: Breaking In New Rifle	Bramble	15/12/07 12:01 PM
Re: Breaking In New Rifle	jro45	15/12/07 12:42 AM
Re: Breaking In New Rifle	xausa	26/09/07 04:46 AM
Re: Breaking In New Rifle	Ripp	25/09/07 10:04 PM
Re: Breaking In New Rifle	Mike_McGuire	25/09/07 07:04 PM
Re: Breaking In New Rifle	AussieHunter	25/09/07 08:19 PM

Extra information

0 registered and 85 anonymous users are browsing this forum.

Moderator:

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 6510

Jump to

NitroExpress.com

Powered by UBB.threads™ 6.5.5

Home | Ezine | Forums | Links | Contact

Copyright 2003 to 2011 - all rights reserved