Home | Ezine | Forums | Links | Contact
NitroExpress.com: Anyone have experience with MS 6.5x54 and 9.5x57mm

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Shooting & Reloading - Mausers, Big Bores and others >> Mannlicher Discussion forum & Archive

333_okh
.275 member


Reged: 24/12/05
Posts: 87
Loc: Northern California
Re: Anyone have experience with MS 6.5x54 and 9.5x57mm
      20/08/07 06:28 AM

Quote:

The problem with the 6.5MS in Great Britain is that it is not deer legal as the velocity with the 160 grain bullet is insufficient. It WAS until that law was introduced very poipular as a hill stalking weapon. Light, low recoil, and with the 160 grain bullet, apparently, a good killer on red deer.

Would I consider an old Mannlicher rifle nowadays? No! You will struggle to get the ammunition and I don't think that it has the flexibility of the 6.5 x 55 or other more useful cartridges in that size.

Also some of those old Mannlicher rifles are a bit generous on the bore dimensions and not given to modern accuracy standards...especially if they have been shot with a large quantity of cordite loads in the past.




I agree. I have the 1903 6.5 carbine with a factory original Khales scope. I am building a new custom rifle based on a highly modified Montana Rifleman 1999 short action [actually based off the 7X57], but my caliber this times is 6.5X55 shooting 155 grain Lapua slugs.

Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* Anyone have experience with MS 6.5x54 and 9.5x57mm Prev_Forum 29/12/02 03:06 AM
. * * Re: Anyone have experience with MS 6.5x54 and 9.5x57mm ORION   20/12/04 06:46 PM
. * * Re: Anyone have experience with MS 6.5x54 and 9.5x57mm enfieldspares   12/07/07 09:30 AM
. * * Re: Anyone have experience with MS 6.5x54 and 9.5x57mm 333_okh   20/08/07 06:28 AM
. * * Re: Anyone have experience with MS 6.5x54 and 9.5x57mm Nakihunter   03/03/08 04:08 PM
. * * Re: Anyone have experience with MS 6.5x54 and 9.5x57mm escard   03/03/08 11:59 PM
. * * Re: Anyone have experience with MS 6.5x54 and 9.5x57mm 9.3x57   04/03/08 12:37 AM
. * * Re: Anyone have experience with MS 6.5x54 and 9.5x57mm JabaliHunter   04/03/08 10:41 PM
. * * MS 6.5x54 escard   04/03/08 11:41 PM
. * * Re: MS 6.5x54 xausa   05/03/08 01:27 AM
. * * Re: MS 6.5x54 Nakihunter   28/03/08 11:34 AM
. * * Re: Anyone have experience with MS 6.5x54 and 9.5x57mm Nakihunter   04/03/08 01:35 PM
. * * Re: Anyone have experience with MS 6.5x54 and 9.5x57mm 50Calshtr   04/03/08 02:08 PM
. * * Re: Anyone have experience with MS 6.5x54 and 9.5x57mm Marrakai   04/03/08 12:27 AM
. * * Re: Anyone have experience with MS 6.5x54 and 9.5x57mm tinker   12/07/07 12:10 PM
. * * Re: Anyone have experience with MS 6.5x54 and 9.5x57mm kamilaroi   18/12/04 02:22 PM
. * * Re: Anyone have experience with MS 6.5x54 and 9.5x57mm NitroXAdministrator   18/12/04 03:05 PM

Extra information
0 registered and 48 anonymous users are browsing this forum.

Moderator:  CptCurl 



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating: ****
Thread views: 8103

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved