Home | Ezine | Forums | Links | Contact
NitroExpress.com: .243 or 7mm

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Shooting & Reloading - Mausers, Big Bores and others >> Rifles

szihn
.400 member


Reged: 24/06/07
Posts: 2121
Loc: United States
Re: .243 or 7mm
      11/08/07 03:18 PM

As in many things in life, we remember the very good and the very bad most clearly. In the case of M-700 failures, those are the things that stick in the minds of people that have had them. In the case of the millions of m-700 "non-failures" ..........what's to remember?
So i am not going out of my way to "slam" M-700s. Just stating facts
Now if I were to get a 700 for myself I would do one thing right at the first, and another thing every time I shot it
The first thing I would do is to clamp the bolt in a vice and hit the handle with a big wooden mallet. If the handle doesn't come off with that, it's not going to. I'd have one that got a good solder joint. I'd say at least 75% of those I have put back on were brand new. Bad joints! Yeah, some were old, and had been used for years, but I doubt those that had served 10-30 years would have survived the "mallet test" if they would have been so tested. So I'd rather break it off right out of the chute, and put it back the right way. Then I'd never have to worry about it again.
The 2nd thing I'd do every time I cleaned the rifle is to put a drop of Hoppies 9 on the bolt face and leave it wet. The when I take it out of the safe, I'd dry it with a tissue and go shooting. I believe that just leaving the solvent on the bolt face would cure about 99% or all extractor failures in m-700s. But I am amazed at how many men don't EVER clean their rifles, and those are the ones I'd get in the shop, with extractors jamming or breaking.
No the Rem-700 is not my favorite action, but I would not feel like I was holding a gun waiting to break if I had one.
I like Rugers and Winchesters better, and Mausers a lot better, but I am not going to say I hate Remingtons.
Just test the bolt joint BEFORE you NEED it to work, and CLEAN the bolt face and extractors. You'll probably be more likely to get hit by lightning than to have one fail in the field. If you do have one fail, after the "mallet test" and with a clean bolt face, ------ wellllll ------------- I guess You are just not living a clean life.


Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* .243 or 7mm MoRat 07/08/07 11:49 AM
. * * Re: .243 or 7mm Weatherby   11/08/07 03:48 PM
. * * Re: .243 or 7mm xausa   08/08/07 01:15 AM
. * * Re: .243 or 7mm Ripp   08/08/07 01:51 AM
. * * Re: .243 or 7mm xausa   08/08/07 02:35 PM
. * * Re: .243 or 7mm Ripp   08/08/07 09:36 PM
. * * Re: .243 or 7mm Tatume   08/08/07 10:58 PM
. * * Re: .243 or 7mm 9.3x57   09/08/07 12:04 AM
. * * Re: .243 or 7mm Ripp   09/08/07 09:51 AM
. * * Re: .243 or 7mm szihn   11/08/07 04:08 AM
. * * Re: .243 or 7mm Ripp   11/08/07 08:19 AM
. * * Re: .243 or 7mm 9.3x57   11/08/07 12:33 PM
. * * Re: .243 or 7mm szihn   11/08/07 03:18 PM
. * * Re: .243 or 7mm Ripp   12/08/07 01:31 AM
. * * Re: .243 or 7mm 9.3x57   12/08/07 03:04 AM
. * * Re: .243 or 7mm hoppdoc   12/08/07 03:35 AM
. * * Re: .243 or 7mm 340Wby   12/08/07 09:19 PM
. * * Re: .243 or 7mm MoRat   08/08/07 07:29 AM
. * * Re: .243 or 7mm Ripp   07/08/07 12:05 PM
. * * Re: .243 or 7mm MoRat   07/08/07 12:12 PM
. * * Re: .243 or 7mm NE450No2   07/08/07 12:20 PM
. * * Re: .243 or 7mm MoRat   07/08/07 12:23 PM
. * * Re: .243 or 7mm Mike_McGuire   07/08/07 01:34 PM
. * * Re: .243 or 7mm MoRat   07/08/07 03:30 PM
. * * Re: .243 or 7mm Mike_McGuire   07/08/07 04:10 PM
. * * Re: .243 or 7mm Ripp   07/08/07 09:21 PM
. * * Re: .243 or 7mm John303   07/08/07 09:56 PM
. * * Re: .243 or 7mm iqbal   07/08/07 10:16 PM
. * * Re: .243 or 7mm karluk   08/08/07 12:50 AM
. * * Re: .243 or 7mm ozhunter   07/08/07 07:42 PM
. * * Re: .243 or 7mm Tatume   07/08/07 09:52 PM

Extra information
0 registered and 295 anonymous users are browsing this forum.

Moderator:   



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 7411

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved