Home | Ezine | Forums | Links | Contact
NitroExpress.com: .243 or 7mm

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Shooting & Reloading - Mausers, Big Bores and others >> Rifles

Ripp
.577 member


Reged: 19/02/07
Posts: 16072
Loc: Montana, USA
Re: .243 or 7mm
      09/08/07 09:51 AM

9THREEXFIFTY7

Exactely.. however, maybe I am crazy, but it seems one could get a little better quality than now with some manufacturers..

When Weatherby first come out with the ultra-lights--I bought two..one in a .280 Remington and the other in a .257 Weatherby caliber.. while the .280 shot 1/2 inch groups with reloads... I tried everything from Factory to hand loads with the .257 to get it even to 1 1/2 inch and that was a rare moment...I tried a total of 3 Weatherby Ultra-lights in that caliber and never got one to shoot the way I wanted. I then purchased a titanium action Remington, yanked the barrel as Remington does not offer a .257 Weatherby Caliber, had a Hart barrel installed, and have been shooting 1/2 groups or less ever since-with both Barnes Triple Shocks and Nosler Ballistic tips.

I guess, like the previous individual mentioned, they were and are used a ton in both military and police sniper departments...gee, why would that be??.. probably because they don't shoot very well or are not mechanically sound??.I think not... if that was the case they would not have been used throughout the past 4 decades for that purpose..as well as being used by many "TOP END" custom gun makers--the reason being the round action is much easier to bed for a accurate rifle in addition to the benefits of the action itself...and an easily adjustable trigger..

I a have owned Weatherbys, Winchesters, Sako's, Sauers, and yes even Rugers... all in all, the Remingtons have been the most accurate out of the box as a general rule..

As mentioned, I am sure anything can happen, especially when you consider how many hundreds of thousands have been produced.. but as to their soundness overall, I would compare them to anything in their price range. Again, based on my experiences..


Ripp

--------------------
ALL MEN DIE, BUT FEW MEN TRULY LIVE..

Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* .243 or 7mm MoRat 07/08/07 11:49 AM
. * * Re: .243 or 7mm Weatherby   11/08/07 03:48 PM
. * * Re: .243 or 7mm xausa   08/08/07 01:15 AM
. * * Re: .243 or 7mm Ripp   08/08/07 01:51 AM
. * * Re: .243 or 7mm xausa   08/08/07 02:35 PM
. * * Re: .243 or 7mm Ripp   08/08/07 09:36 PM
. * * Re: .243 or 7mm Tatume   08/08/07 10:58 PM
. * * Re: .243 or 7mm 9.3x57   09/08/07 12:04 AM
. * * Re: .243 or 7mm Ripp   09/08/07 09:51 AM
. * * Re: .243 or 7mm szihn   11/08/07 04:08 AM
. * * Re: .243 or 7mm Ripp   11/08/07 08:19 AM
. * * Re: .243 or 7mm 9.3x57   11/08/07 12:33 PM
. * * Re: .243 or 7mm szihn   11/08/07 03:18 PM
. * * Re: .243 or 7mm Ripp   12/08/07 01:31 AM
. * * Re: .243 or 7mm 9.3x57   12/08/07 03:04 AM
. * * Re: .243 or 7mm hoppdoc   12/08/07 03:35 AM
. * * Re: .243 or 7mm 340Wby   12/08/07 09:19 PM
. * * Re: .243 or 7mm MoRat   08/08/07 07:29 AM
. * * Re: .243 or 7mm Ripp   07/08/07 12:05 PM
. * * Re: .243 or 7mm MoRat   07/08/07 12:12 PM
. * * Re: .243 or 7mm NE450No2   07/08/07 12:20 PM
. * * Re: .243 or 7mm MoRat   07/08/07 12:23 PM
. * * Re: .243 or 7mm Mike_McGuire   07/08/07 01:34 PM
. * * Re: .243 or 7mm MoRat   07/08/07 03:30 PM
. * * Re: .243 or 7mm Mike_McGuire   07/08/07 04:10 PM
. * * Re: .243 or 7mm Ripp   07/08/07 09:21 PM
. * * Re: .243 or 7mm John303   07/08/07 09:56 PM
. * * Re: .243 or 7mm iqbal   07/08/07 10:16 PM
. * * Re: .243 or 7mm karluk   08/08/07 12:50 AM
. * * Re: .243 or 7mm ozhunter   07/08/07 07:42 PM
. * * Re: .243 or 7mm Tatume   07/08/07 09:52 PM

Extra information
0 registered and 5 anonymous users are browsing this forum.

Moderator:   



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 6936

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved