Home | Ezine | Forums | Links | Contact
NitroExpress.com: .416 Taylor: Who's got One???

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Shooting & Reloading - Mausers, Big Bores and others >> Big Bore Rifles

DarylS
.700 member


Reged: 10/08/05
Posts: 27729
Loc: Beautiful British Columbia, Ca...
Re: .416 Taylor: Who's got One???
      06/08/07 11:30 PM

As a matter of fact, even Ken Waters got 2,400fps with 400gr. in the Ruger factory test 1-up rifle, and his loadings are usually kept softer than most people load. If Ken can do it, anyone can. That was before some of the new extreme powders (and others), which makes that velocity even easier - at pressure not higher than factory magnum pressures of 63,000PSI.
: I know darn well the .416 Taylor will make 2,400fps with 400gr. bullets. John Whooters was also able to get it, and used that loading very successfully in Africa for several years as did other hunters back in the 50's through 70's.
; The fact that a larger case will do it with less pressure means squat. Of course a larger case will do it with less pressure - that's plain physics. That the smaller case will do it, is also plain physics.

--------------------
Daryl


"a gun without hammers is like a Spaniel without ears" King George V

Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* .416 Taylor: Who's got One??? 9.3x57 02/07/07 02:54 PM
. * * Re: .416 Taylor: Who's got One??? allenday   24/07/07 12:09 AM
. * * Re: .416 Taylor: Who's got One??? 9.3x57   25/07/07 01:50 AM
. * * Re: .416 Taylor: Who's got One??? Ripp   25/07/07 10:58 AM
. * * Re: .416 Taylor: Who's got One??? fivebigbores   25/07/07 12:49 PM
. * * Re: .416 Taylor: Who's got One??? bulldog563   27/07/07 01:52 AM
. * * Re: .416 Taylor: Who's got One??? allenday   06/08/07 12:53 AM
. * * Re: .416 Taylor: Who's got One??? 9.3x57   06/08/07 01:16 AM
. * * Re: .416 Taylor: Who's got One??? 9.3x57   25/07/07 12:42 PM
. * * Re: .416 Taylor: Who's got One??? Ripp   25/07/07 11:10 PM
. * * Re: .416 Taylor: Who's got One??? 9.3x57   25/07/07 11:37 PM
. * * Re: .416 Taylor: Who's got One??? DoubleD   26/07/07 02:43 AM
. * * Re: .416 Taylor: Who's got One??? 9.3x57   26/07/07 06:41 AM
. * * Re: .416 Taylor: Who's got One??? szihn   26/07/07 07:42 AM
. * * Re: .416 Taylor: Who's got One??? Ripp   26/07/07 12:36 PM
. * * Re: .416 Taylor: Who's got One??? szihn   06/08/07 02:22 AM
. * * Re: .416 Taylor: Who's got One??? Schamankungulo   06/08/07 09:37 AM
. * * Re: .416 Taylor: Who's got One??? DarylS   06/08/07 11:30 PM
. * * Re: .416 Taylor: Who's got One??? szihn   07/08/07 12:55 AM
. * * Re: .416 Taylor: Who's got One??? Schamankungulo   07/08/07 04:32 AM
. * * Re: .416 Taylor: Who's got One??? Ripp   25/07/07 11:50 PM
. * * Re: .416 Taylor: Who's got One??? 9.3x57   26/07/07 02:29 AM
. * * Re: .416 Taylor: Who's got One??? Marrakai   24/07/07 12:21 AM
. * * Re: .416 Taylor: Who's got One??? ALAN_MCKENZIE   09/07/07 09:27 PM
. * * Re: .416 Taylor: Who's got One??? jimatcat   22/07/07 11:33 AM
. * * Re: .416 Taylor: Who's got One??? BFaucett   04/07/07 04:52 AM
. * * Re: .416 Taylor: Who's got One??? 9.3x57   04/07/07 06:53 AM
. * * Re: .416 Taylor: Who's got One??? BFaucett   04/07/07 08:20 AM
. * * Re: .416 Taylor: Who's got One??? szihn   09/07/07 02:17 PM
. * * Re: .416 Taylor: Who's got One??? Marrakai   02/07/07 09:20 PM
. * * Re: .416 Taylor: Who's got One??? 9.3x57   02/07/07 11:37 PM
. * * Re: .416 Taylor: Who's got One??? JLS   03/07/07 03:33 AM
. * * Re: .416 Taylor: Who's got One??? Marrakai   04/07/07 12:27 AM

Extra information
0 registered and 60 anonymous users are browsing this forum.

Moderator:   



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 10167

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved