Home | Ezine | Forums | Links | Contact
NitroExpress.com: Scrub Bulls - Solids of softs in 375HH??

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Hunting >> Hunting in Australia, NZ & the South Pacific

Ripp
.577 member


Reged: 19/02/07
Posts: 16072
Loc: Montana, USA
Re: Scrub Bulls - Solids of softs in 375HH??
      14/06/07 11:30 AM

Quote:

If not I'll get some 300gr factory ammo with either Swift A-frame or Failsafe projectiles for this hunt.


Just FYI--the A-Frame is a bonded bullet where as the Failsafe, at least the older ones --were more of a copper bullet with a black coating on them called lubalux- I believe--anyway, one item I know is that coating left in the barrel is very hard to get out-not saying it can't be done but it is harder than normal copper deposits..

The other is most barrel manufacturers are not real fans of this or molly coating as well. I recently purchased a new Cooper--in the instruction manual it stated--1. do not shoot molly coated bullets to break in barrel and do shoot them at all for the first 500 rounds...

The only other item or complaint I have heard, is that, like the older Barnes bullets, as the Fail Safes open up the petals can break off intead of completing the mushroom.. This will/should not be a problem with a .375 as the velocities are lower than the bigger magnum cartridges..

I can say, I have shot probably 30 animals with the Swift A-Frame and have been very happy. I shot a Eland with a 400 Gr. out of my .416--we recovered the bullet--I brought it home and weighed it--392 grains--not too bad..

Good luck on your hunt--
Ripp

Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* Scrub Bulls - Solids of softs in 375HH?? LukeinNZ 12/06/07 01:11 PM
. * * Re: Scrub Bulls - Solids of softs in 375HH?? NitroXAdministrator   13/06/07 12:39 AM
. * * Re: Scrub Bulls - Solids of softs in 375HH?? 9.3x57   13/06/07 10:34 AM
. * * Re: Scrub Bulls - Solids of softs in 375HH?? TOP_PREDATOR   13/06/07 04:06 PM
. * * Re: Scrub Bulls - Solids of softs in 375HH?? 260rem   13/06/07 09:56 PM
. * * Re: Scrub Bulls - Solids of softs in 375HH?? LukeinNZ   14/06/07 07:50 AM
. * * Re: Scrub Bulls - Solids of softs in 375HH?? Ripp   14/06/07 11:30 AM
. * * Re: Scrub Bulls - Solids of softs in 375HH?? LukeinNZ   14/06/07 02:03 PM
. * * Re: Scrub Bulls - Solids of softs in 375HH?? TOP_PREDATOR   14/06/07 08:25 AM
. * * Re: Scrub Bulls - Solids of softs in 375HH?? Ripp   12/06/07 09:28 PM
. * * Re: Scrub Bulls - Solids of softs in 375HH?? 9.3x57   12/06/07 10:27 PM
. * * Re: Scrub Bulls - Solids of softs in 375HH?? 500Nitro   12/06/07 10:40 PM
. * * Re: Scrub Bulls - Solids of softs in 375HH?? Marrakai   12/06/07 07:38 PM

Extra information
0 registered and 44 anonymous users are browsing this forum.

Moderator:   



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 5299

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved