Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: Recommendations needed for an entry level DR in 9.3x74r

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Double Rifles, Single Shots & Combinations >> Double Rifles

Pilgrim
.275 member

Reged: 25/05/04
Posts: 57
Loc: Washington State, USA

Re: Recommendations needed for an entry level DR in 9.3x74r
31/05/07 02:23 PM

I'm probably the guy you are referring to re: Chapuis UGEX 9.3 x 74R and accuracy. The problem with my rifle was rough bores. After 2-300 rounds they smoothed out sufficiently that the barrel dwell time changed and the barrels crossed by ~5" at 100yds. Initial accuracy was wonderful ( 2l,2r in ~ 1" @ 100 yds.) but teh accuracy slowly deteriorated with use. It has now been re-regulated by JJ and he thinks that even if it smooths out some more, the regulation change(s) if any will be minor and easily adjusted with loads sith little velocity loss. Based upon my use of the rifle the last few range sessions over tha past week or so, I suspect he is right. It is still fouling, but not as badly as originally. My rifle now regulates with 286 gr @~2300 fps. Accuracy is better than I am currently holding, so I can't give you the particulars, but I suspect it is less than 2" for 2 lefts and rights @ 100 yds. More likely it is in the 1 1/2" range. I can tighten them up by changing loads, but am not satisfied with the shooters perfromance right now, so changes in loads is pointless at this time. FWIW Pilgrim

Post Extras

Print Post

Remind Me!

Notify Moderator

Entire topic
Subject	Posted by	Posted on
Recommendations needed for an entry level DR in 9.3x74r	dougk	31/05/07 01:58 AM
Re: Recommendations needed for an entry level DR in 9.3x74r	Anonymous	12/06/07 02:09 AM
Re: Recommendations needed for an entry level DR in 9.3x74r	DUGABOY1	12/06/07 12:26 AM
Re: Recommendations needed for an entry level DR in 9.3x74r	zimhunter	12/06/07 06:36 AM
Re: Recommendations needed for an entry level DR in 9.3x74r	DUGABOY1	14/06/07 01:50 AM
Re: Recommendations needed for an entry level DR in 9.3x74r	9.3x57	13/06/07 01:20 AM
Re: Recommendations needed for an entry level DR in 9.3x74r	NitroX	14/06/07 12:46 PM
Re: Recommendations needed for an entry level DR in 9.3x74r	Rustyzipper	20/08/07 12:04 PM
Re: Recommendations needed for an entry level DR in 9.3x74r	farshot	25/08/07 12:02 AM
Re: Recommendations needed for an entry level DR in 9.3x74r	watto	02/09/07 09:43 PM
Re: Recommendations needed for an entry level DR in 9.3x74r	zimhunter	13/06/07 10:55 AM
Re: Recommendations needed for an entry level DR in 9.3x74r	9.3x57	13/06/07 11:23 AM
Re: Recommendations needed for an entry level DR in 9.3x74r	dnovo	13/06/07 10:09 PM
Re: Recommendations needed for an entry level DR in 9.3x74r	400NitroExpress	31/05/07 05:06 AM
Re: Recommendations needed for an entry level DR in 9.3x74r	NE450No2	31/05/07 05:16 AM
Re: Recommendations needed for an entry level DR in 9.3x74r	hoppdoc	31/05/07 09:24 AM
Re: Recommendations needed for an entry level DR in 9.3x74r	NE450No2	31/05/07 09:52 AM
Re: Recommendations needed for an entry level DR in 9.3x74r	Rustyzipper	31/05/07 11:50 AM
Re: Recommendations needed for an entry level DR in 9.3x74r	Pilgrim	31/05/07 02:23 PM
Re: Recommendations needed for an entry level DR in 9.3x74r	zimhunter	31/05/07 02:07 AM
Re: Recommendations needed for an entry level DR in 9.3x74r	peter	31/05/07 03:13 AM
Re: Recommendations needed for an entry level DR in 9.3x74r	dougk	31/05/07 03:30 AM

Extra information

0 registered and 482 anonymous users are browsing this forum.

Moderator: CptCurl

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 6024

Jump to

NitroExpress.com

Powered by UBB.threads™ 6.5.5

Home | Ezine | Forums | Links | Contact

Copyright 2003 to 2011 - all rights reserved