Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: Putting a DR back "on face"

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Double Rifles, Single Shots & Combinations >> Building Double Rifles & Gunsmithing

Bramble
.375 member

Reged: 29/07/06
Posts: 950
Loc: England

Re: Putting a DR back "on face"
27/02/07 01:07 AM

There is another way. If it is only a few thou to make up, find a company that can Industrial hard chrome plate. This is not like decorative plating it is used to build up the bearing housings for turbine engine and the like. Pal of mine used to get my stuff done out the back of Rolls Royce engine plant till it moved.
Still even if you have to pay for $100 or so they can build up the lumps and hook till you can put it back on face with no danger to the action. IHC is a molecular bond to the steel and is harder than the steel itself. They can immerse just the lumps or just the hook and mask off the rest etc so you can cure all types of jointing problems with a little forethought.
Never tried it on a worn chamber but thinking about it now as I am typing this, that might be possible also by plugging in front of the throat and then reaming afterwards with a carbide reamer.
I will make some enquiries about that I can see that being quite usefull in some situations, for a pitted chamber, ream it a little deep to clean up the pits, plate it to gain a few thou back and ream again to the correct depth???
Worth asking I think.

Regards

Post Extras

Print Post

Remind Me!

Notify Moderator

Entire topic
Subject	Posted by	Posted on
Putting a DR back "on face"	detoews	28/09/05 08:34 AM
Re: Putting a DR back "on face"	Anonymous	12/07/07 04:58 AM
Re: Putting a DR back "on face"	Rusty	29/09/05 02:25 AM
Re: Putting a DR back "on face"	Peterb	28/09/05 10:24 AM
Re: Putting a DR back "on face"	500Nitro	28/09/05 06:21 PM
Re: Putting a DR back "on face"	Peterb	29/09/05 12:54 PM
Re: Putting a DR back "on face"	500Nitro	29/09/05 06:06 PM
Re: Putting a DR back "on face"	Peterb	30/09/05 04:31 AM
Re: Putting a DR back "on face"	NitroX	27/12/06 11:50 PM
Re: Putting a DR back "on face"	Bramble	27/02/07 01:07 AM
Re: Putting a DR back "on face"	Carpetsahib	16/05/07 11:49 AM
Re: Putting a DR back "on face"	empirevr	12/07/07 02:34 AM
Re: Putting a DR back "on face"	Marrakai	28/09/05 09:13 PM
Re: Putting a DR back "on face"	SXS	28/09/05 10:16 PM
Re: Putting a DR back "on face"	NE450No2	28/09/05 05:23 PM
Re: Putting a DR back "on face"	mickey	28/09/05 08:54 AM

Extra information

0 registered and 95 anonymous users are browsing this forum.

Moderator: CptCurl

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 2095

Jump to

NitroExpress.com

Powered by UBB.threads™ 6.5.5

Home | Ezine | Forums | Links | Contact

Copyright 2003 to 2011 - all rights reserved