Home | Ezine | Forums | Links | Contact
NitroExpress.com: 458 Lott on a standard length action

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Shooting & Reloading - Mausers, Big Bores and others >> Mauser Discussion Forum

Shanster
.275 member


Reged: 02/10/06
Posts: 73
Loc: Seattle WA
Re: 458 Lott on a standard length action
      29/01/07 04:53 PM

The Cz accuracy was great you just cant get the rounds in or out. There is a large gap between the bolt and the action. while cocking and pulling back and up on the bolt the action binds so hard you have to smack it foward with your hand to unlock it. A fix i had found consisted of putting a bronze set screw through the rear bridge pushing down on the bolt.(Nice and classy) I had my bolt flame sprayed an built up 5 thousands. Then installed the missing mauser anti bind feature on the rear of the bolt. Next had the feed ramp reshaped so the rounds would not miss the barrell. Then the feed rails had to be cut back about 3/8 in. Remove and cover the safety hole replace with win 70 style. During rapid reload practice I was removing small chunks of flesh from my hand on it. During the same seshion stock split in 3 places and the trigger fell off. Called cz and asked if i could upgrade to a laminate they said no sorry cant help you.( love the customer service) Can I just buy a laminate stock outright answer NO. Next The last round wont feed so I bought another mag spring and am now using 2. I can continue When I calm down.
Shannon

Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* 458 Lott on a standard length action wellplugger 28/12/06 07:06 AM
. * * Re: 458 Lott on a standard length action Mike_McGuire   29/12/06 09:44 AM
. * * Re: 458 Lott on a standard length action wellplugger   30/12/06 04:26 AM
. * * Re: 458 Lott on a standard length action 500grains   30/12/06 07:32 AM
. * * Re: 458 Lott on a standard length action Dave_Hall   30/12/06 08:46 AM
. * * Re: 458 Lott on a standard length action Mike_McGuire   30/12/06 12:40 PM
. * * Re: 458 Lott on a standard length action Dave_Hall   30/12/06 01:19 PM
. * * Re: 458 Lott on a standard length action Mike_McGuire   30/12/06 05:24 PM
. * * Re: 458 Lott on a standard length action Toomany_Tools   02/01/07 02:04 AM
. * * Re: 458 Lott on a standard length action hoppdoc   02/01/07 03:54 AM
. * * Re: 458 Lott on a standard length action 500grains   02/01/07 04:54 AM
. * * Re: 458 Lott on a standard length action wellplugger   04/01/07 02:14 AM
. * * Re: 458 Lott on a standard length action 500grains   04/01/07 04:59 AM
. * * Re: 458 Lott on a standard length action wellplugger   04/01/07 07:28 AM
. * * Re: 458 Lott on a standard length action 500grains   04/01/07 08:27 AM
. * * Re: 458 Lott on a standard length action wellplugger   05/01/07 07:23 AM
. * * Re: 458 Lott on a standard length action Shanster   18/01/07 02:29 PM
. * * Re: 458 Lott on a standard length action tinker   19/01/07 02:16 AM
. * * Re: 458 Lott on a standard length action Shanster   29/01/07 04:53 PM
. * * Re: 458 Lott on a standard length action wellplugger   30/01/07 02:08 AM
. * * Re: 458 Lott on a standard length action wellplugger   01/06/07 05:59 AM
. * * Re: 458 Lott on a standard length action vapodog   16/02/07 11:39 PM
. * * Re: 458 Lott on a standard length action wellplugger   17/02/07 06:54 AM
. * * Re: 458 Lott on a standard length action wellplugger   26/01/07 03:19 AM
. * * Re: 458 Lott on a standard length action 500grains   30/12/06 09:34 AM
. * * Re: 458 Lott on a standard length action Dave_Hall   30/12/06 11:16 AM
. * * Re: 458 Lott on a standard length action 500grains   28/12/06 10:13 AM
. * * Re: 458 Lott on a standard length action DarylS   29/12/06 08:58 AM

Extra information
0 registered and 43 anonymous users are browsing this forum.

Moderator:  NitroX 



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 7865

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved