Home | Ezine | Forums | Links | Contact
NitroExpress.com: 375H&H solid & soft-point loads

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Shooting & Reloading - Mausers, Big Bores and others >> Big Bore Rifles

SteveH
.300 member


Reged: 26/12/03
Posts: 118
Loc: Hillsboro, Oregon
Re: 375H&H solid & soft-point loads
      14/12/06 05:47 AM

Allen,

I use 69.0 gr. of R15 and a 250 LRM primer behind a 300 gn. A-Frame to get 2456fps.

I don't have my Solid load here at work but it used a similar amount of powder behind a new Hornady solid.

Both loads were right on top of each other at 100 yds.

These loads worked fine for my buff, if he'd have just died sooner. As a side note I have two of the solid that traversed 3/4 of the length of the buff (extreme quartering away) found under the brisket. No real deformation.

-Steve

Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* 375H&H solid & soft-point loads allenday 14/12/06 02:51 AM
. * * Re: 375H&H solid & soft-point loads JTOMLINSON   14/12/06 08:10 PM
. * * Re: 375H&H solid & soft-point loads bulldog563   15/12/06 12:51 AM
. * * Re: 375H&H solid & soft-point loads allenday   16/12/06 04:01 AM
. * * Re: 375H&H solid & soft-point loads SteveH   16/12/06 04:41 AM
. * * Re: 375H&H solid & soft-point loads Boomer   21/12/06 02:20 AM
. * * Re: 375H&H solid & soft-point loads Bad_Pops   02/01/16 05:07 AM
. * * Re: 375H&H solid & soft-point loads Rule303   02/01/16 09:44 AM
. * * Re: 375H&H solid & soft-point loads TOBY458   15/02/16 03:57 AM
. * * Re: 375H&H solid & soft-point loads NitroXAdministrator   25/08/16 07:41 PM
. * * Re: 375H&H solid & soft-point loads DarylS   15/02/16 04:15 AM
. * * Re: 375H&H solid & soft-point loads Boomer   31/01/07 02:39 AM
. * * Re: 375H&H solid & soft-point loads Savuti_One_Shot   31/01/07 05:27 AM
. * * Re: 375H&H solid & soft-point loads Lee440   08/02/07 01:48 PM
. * * Re: 375H&H solid & soft-point loads Ripp   25/08/16 11:41 PM
. * * Re: 375H&H solid & soft-point loads jro45   04/03/07 02:56 AM
. * * Re: 375H&H solid & soft-point loads 500grains   14/12/06 05:08 AM
. * * Re: 375H&H solid & soft-point loads SteveH   14/12/06 05:47 AM
. * * Re: 375H&H solid & soft-point loads SteveH   14/12/06 12:30 PM
. * * Re: 375H&H solid & soft-point loads Mike_McGuire   14/12/06 04:57 AM
. * * Re: 375H&H solid & soft-point loads Tightloop   14/12/06 04:36 AM
. * * Re: 375H&H solid & soft-point loads NE450No2   14/12/06 03:03 AM
. * * Re: 375H&H solid & soft-point loads DarylS   14/12/06 03:26 AM

Extra information
0 registered and 71 anonymous users are browsing this forum.

Moderator:   



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 13560

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved