Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: 375H&H solid & soft-point loads

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Big Bore Rifles

DarylS
.700 member

Reged: 10/08/05
Posts: 27732
Loc: Beautiful British Columbia, Ca...

Re: 375H&H solid & soft-point loads
14/12/06 03:26 AM

All of my past 3 .375 H&H as well as the 2 '06 Improveds, have put not only different bullet styles, but different weights into much the same group at 100 yards. They ran from 235's to 300gr. The 350gr. Barnes Originals struck a bit higher, just out of the group, but within 1-1/2" of the main 2" group. As for the rest, they'd make a 2" round group, 235, 250, 270, 285 and 300gr.
: The only way to find out if yours does the same is to shoot them.
: All books have good loading data. I tend to stay away from 4350 and such slow powders, but some folks like them. Appropriate ballistics can be achieved with less of the faster burning powders which also reduces recoil. About the slowest needed is Re#15. IMR 4064 has always been a great powder for me in my BRNO's, but doesn't deliver the highest velocities, just the best accuracy. Getting 100fps of velocity with an additional 10 gr. of slower powder isn't important, but great accuracy is.

--------------------
Daryl

"a gun without hammers is like a Spaniel without ears" King George V

Post Extras

Print Post

Remind Me!

Notify Moderator

Entire topic
Subject	Posted by	Posted on
375H&H solid & soft-point loads	allenday	14/12/06 02:51 AM
Re: 375H&H solid & soft-point loads	JTOMLINSON	14/12/06 08:10 PM
Re: 375H&H solid & soft-point loads	bulldog563	15/12/06 12:51 AM
Re: 375H&H solid & soft-point loads	allenday	16/12/06 04:01 AM
Re: 375H&H solid & soft-point loads	SteveH	16/12/06 04:41 AM
Re: 375H&H solid & soft-point loads	Boomer	21/12/06 02:20 AM
Re: 375H&H solid & soft-point loads	Bad_Pops	02/01/16 05:07 AM
Re: 375H&H solid & soft-point loads	Rule303	02/01/16 09:44 AM
Re: 375H&H solid & soft-point loads	TOBY458	15/02/16 03:57 AM
Re: 375H&H solid & soft-point loads	NitroX	25/08/16 07:41 PM
Re: 375H&H solid & soft-point loads	DarylS	15/02/16 04:15 AM
Re: 375H&H solid & soft-point loads	Boomer	31/01/07 02:39 AM
Re: 375H&H solid & soft-point loads	Savuti_One_Shot	31/01/07 05:27 AM
Re: 375H&H solid & soft-point loads	Lee440	08/02/07 01:48 PM
Re: 375H&H solid & soft-point loads	Ripp	25/08/16 11:41 PM
Re: 375H&H solid & soft-point loads	jro45	04/03/07 02:56 AM
Re: 375H&H solid & soft-point loads	500grains	14/12/06 05:08 AM
Re: 375H&H solid & soft-point loads	SteveH	14/12/06 05:47 AM
Re: 375H&H solid & soft-point loads	SteveH	14/12/06 12:30 PM
Re: 375H&H solid & soft-point loads	Mike_McGuire	14/12/06 04:57 AM
Re: 375H&H solid & soft-point loads	Tightloop	14/12/06 04:36 AM
Re: 375H&H solid & soft-point loads	NE450No2	14/12/06 03:03 AM
Re: 375H&H solid & soft-point loads	DarylS	14/12/06 03:26 AM

Extra information

0 registered and 40 anonymous users are browsing this forum.

Moderator:

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 14970

Jump to

NitroExpress.com

Powered by UBB.threads™ 6.5.5

Home | Ezine | Forums | Links | Contact

Copyright 2003 to 2011 - all rights reserved