Home | Ezine | Forums | Links | Contact
NitroExpress.com: Brno ZKK602 actions for custom rifle.

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Shooting & Reloading - Mausers, Big Bores and others >> Mauser Discussion Forum

4seventy
Sponsor


Reged: 07/05/03
Posts: 2210
Loc: Queensland Australia
Re: Brno ZKK602 actions for custom rifle.
      29/12/03 08:43 PM

CR 500,
Yes the big Brno action has been used in many custom rifles and has also been used by big name makers.
They differ from the 98 Mauser in several ways, most notably in their ejector and trigger systems.
They are closer to the design of the original pre 64 Winchester than the 98 Mauser.
The early peep sight actions are supposed to be of better quality than later Brno's but after owning both types I'm not so sure on that issue.
That said I'd rather have the earlier peep action as I happen to like peeps.

The action has many plusses as far as big game rifles go.
It also has a few things that will need some "fixing".

The 5 shot drop magazine is sometimes a bit too wide and this allows cartridges to float back and forth when the bolt is closed.
On a big banger this can hammer the hell out of soft point ammo during recoil.

The bolt, even on the peep actions can be a bit "draggy" and can do with some lapping and smoothing and also some attention is needed regarding the ejector spring pressure.

The safety works ass about face.

The "single set" trigger is not much chop on a big gun so hopefully you also have the standard trigger as well.

The integral 3/4" scope dovetails limit the type of mounts you can fit, and also depending what mounts are used, you may have to organize some sort of recoil stop for them.

The bolt handle requires a higher than ideal scope mount especially if the rifle is stocked to use open sights.

The knife edge extractor notch cut into factory 375 and 458 barrels can play havoc with cartridge feed on the big blunt round nose soft point bullets.


These are a few things that I had to address when I built a semi custom Brno 602 458 Win Mag.
They can be made into a very good big game rifle and I really did like mine.
Thing is I like doubles better and it had to be sold.



Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* Brno ZKK602 actions for custom rifle. cr500 29/12/03 07:56 PM
. * * Re: Brno ZKK602 actions for custom rifle. cr500   29/12/03 10:25 PM
. * * Re: Brno ZKK602 actions for custom rifle. 4seventy   30/12/03 07:19 AM
. * * Re: Brno ZKK602 actions for custom rifle. cr500   30/12/03 09:26 AM
. * * Re: Brno ZKK602 actions for custom rifle. 4seventy   30/12/03 10:20 AM
. * * Re: Brno ZKK602 actions for custom rifle. cr500   30/12/03 05:48 PM
. * * Re: Brno ZKK602 actions for custom rifle. 4seventy   29/12/03 08:43 PM
. * * Re: Brno ZKK602 actions for custom rifle. cr500   29/12/03 10:11 PM

Extra information
0 registered and 66 anonymous users are browsing this forum.

Moderator:  NitroX 



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 4554

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved