Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: Engraving ideas for a singleshot project

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Double Rifles, Single Shots & Combinations >> Single Shots & Combination Guns

DPhillips
.375 member

Reged: 09/10/03
Posts: 819
Loc: Alaska

Re: Engraving ideas for a singleshot project
14/06/06 02:51 PM

This will be the Hagn. Finally! I am going to have them build it, lock, stock and barrel...

Small action, swamped octagonal barrel with integral quarter rib and front sight ramp. I'll try to meet with them at the ACGG show to size up for the timber.

I really thought I had the cartridge pinned down, but am coming across so many conflicting reports of velocity and load data for it, I may abandon the 7x75 Vom Hofe SE for something else. Load and ballistic data is all over the place from the few sources I can find. Not consistent even on case capacity. Even still, with the x75R case being almost 3" long, to get the performance from it, it does require a long barrel. The anchor of this entire project is using the small action. Balance and handling qualities are much more important to me than any given cartridge. So, if one cartridge requires an unbalanced rifle or degrades handling qualities of the rifle, I will have to choose something else. I would like to stay in the 7mm to 30 caliber range though.

The engraving is something that has been an afterthought in nearly a decade of planning. I do believe the rifle deserves it, though. I do have SDH's book and have referenced it many times over this process. I do not know Jim White, do you have some contact info you could PM me?

Any additional thoughts or suggestions would be very much appreciated.

Thanks

Post Extras

Print Post

Remind Me!

Notify Moderator

Entire topic
Subject	Posted by	Posted on
Engraving ideas for a singleshot project	DPhillips	13/06/06 04:38 PM
Re: Engraving ideas for a singleshot project	johndozier	02/07/06 10:21 AM
Re: Engraving ideas for a singleshot project	DPhillips	02/07/06 12:55 PM
Re: Engraving ideas for a singleshot project	Sharps	04/07/06 10:59 AM
Re: Engraving ideas for a singleshot project	DPhillips	04/07/06 03:27 PM
Re: Engraving ideas for a singleshot project	Sharps	05/07/06 12:03 AM
Re: Engraving ideas for a singleshot project	DPhillips	05/07/06 03:59 AM
Re: Engraving ideas for a singleshot project	Sharps	05/07/06 06:34 AM
Re: Engraving ideas for a singleshot project	DPhillips	05/07/06 07:26 AM
Re: Engraving ideas for a singleshot project	new_guy	01/07/06 08:53 AM
Re: Engraving ideas for a singleshot project	DPhillips	01/07/06 03:06 PM
Re: Engraving ideas for a singleshot project	akjeff	14/06/06 12:39 PM
Re: Engraving ideas for a singleshot project	DPhillips	14/06/06 02:51 PM
Re: Engraving ideas for a singleshot project	akjeff	17/06/06 12:51 PM
Re: Engraving ideas for a singleshot project	DoubleD	14/06/06 02:17 PM
Re: Engraving ideas for a singleshot project	bulldog563	14/06/06 04:25 PM
Re: Engraving ideas for a singleshot project	bulldog563	13/06/06 09:39 PM

Extra information

0 registered and 36 anonymous users are browsing this forum.

Moderator: Huvius

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 5555

Jump to

NitroExpress.com

Powered by UBB.threads™ 6.5.5

Home | Ezine | Forums | Links | Contact

Copyright 2003 to 2011 - all rights reserved