Home | Ezine | Forums | Links | Contact
NitroExpress.com: HEYM "PH" 450/400 3"... who wants one?

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Double Rifles, Single Shots & Combinations >> Double Rifles

400NitroExpress
.400 member


Reged: 26/11/03
Posts: 1154
Loc: Lone Star State
Re: HEYM "PH" 450/400 3"... who wants one?
      11/05/06 03:26 PM

Jim:

In reply to:

"It balances perfectly."




Yes, I'm sure it does, and balance is needed, but balance alone doesn't get the job done.

In reply to:

"And as for barrel coutours, the steel they use does not require more of a coutour."




No, it has nothing to do with the steel, and it isn't a strength issue. Great handling dynamics in double guns, especially double rifles, require good balance AND proper concentration of weight - 50% of the weight in one third of the length - or "weight between the hands". Barrel contour is used to concentrate weight at the action, and is just as important as an action of the correct size for the caliber. It's impossible to get it just right when you start with an action that is too small.

It's also next to impossible to do it at an affordable price. You can't profitably put a price point DR like the Heym, Merkel, Krieghoff, Chapuis, etc., into the hands of the consumer if you build every one on a caliber specific action. So, some calibers will handle better than others. That's the trade you make for affordable price. My point was that a .400 built on the action that Heym uses for the .470, with better barrel contour, might come pretty close to right.

9.5 lbs is a pound too light for a .470.
--------------------------------------------------------------------------

--------------------
"Serious rifles have two barrels, everything else just burns gunpowder."

Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* HEYM "PH" 450/400 3"... who wants one? new_guy 10/05/06 02:33 PM
. * * Re: HEYM "PH" 450/400 3"... who wants one? CptCurlAdministrator   19/05/06 09:07 AM
. * * Re: HEYM "PH" 450/400 3"... who wants one? new_guy   22/05/06 01:10 AM
. * * Re: HEYM "PH" 450/400 3"... who wants one? hoppdoc   23/05/06 01:11 AM
. * * Re: HEYM "PH" 450/400 3"... who wants one? new_guy   23/05/06 02:22 AM
. * * Re: HEYM "PH" 450/400 3"... who wants one? hoppdoc   23/05/06 03:50 AM
. * * Re: HEYM "PH" 450/400 3"... who wants one? new_guy   23/05/06 04:51 AM
. * * Re: HEYM "PH" 450/400 3"... who wants one? k80   12/05/06 11:50 AM
. * * Re: HEYM "PH" 450/400 3"... who wants one? 400NitroExpress   11/05/06 01:08 AM
. * * Re: HEYM "PH" 450/400 3"... who wants one? mickey   11/05/06 01:20 AM
. * * Re: HEYM "PH" 450/400 3"... who wants one? new_guy   11/05/06 01:36 AM
. * * Re: HEYM "PH" 450/400 3"... who wants one? NitroXAdministrator   11/05/06 03:27 AM
. * * Re: HEYM "PH" 450/400 3"... who wants one? Grizzly   11/05/06 10:13 AM
. * * Re: HEYM "PH" 450/400 3"... who wants one? 400NitroExpress   11/05/06 03:26 PM
. * * Re: HEYM "PH" 450/400 3"... who wants one? Grizzly   12/05/06 09:22 AM
. * * Re: HEYM "PH" 450/400 3"... who wants one? 400NitroExpress   12/05/06 04:58 PM
. * * Re: HEYM "PH" 450/400 3"... who wants one? MopaneMike   13/05/06 11:37 AM
. * * Re: HEYM "PH" 450/400 3"... who wants one? Grizzly   19/05/06 08:46 AM
. * * Re: HEYM "PH" 450/400 3"... who wants one? 400NitroExpress   19/05/06 03:37 PM
. * * Re: HEYM "PH" 450/400 3"... who wants one? Grizzly   21/05/06 07:47 AM
. * * Re: HEYM "PH" 450/400 3"... who wants one? 400NitroExpress   21/05/06 08:54 AM
. * * Re: HEYM "PH" 450/400 3"... who wants one? mickey   21/05/06 12:59 PM
. * * Re: HEYM "PH" 450/400 3"... who wants one? NitroXAdministrator   22/05/06 01:15 AM
. * * Re: HEYM "PH" 450/400 3"... who wants one? DUGABOY1   22/05/06 08:09 AM
. * * Re: HEYM "PH" 450/400 3"... who wants one? Grizzly   22/05/06 11:50 PM
. * * Re: HEYM "PH" 450/400 3"... who wants one? 400NitroExpress   23/05/06 01:43 AM

Extra information
0 registered and 192 anonymous users are browsing this forum.

Moderator:  CptCurl 



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 8411

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved