Home | Ezine | Forums | Links | Contact
NitroExpress.com: 577-450 dies needed

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***
You are not logged in. [Login] Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Big Bore Rifles
Previous thread Previous   View all threads Index   Next thread Next   Flat Mode Flat  

Brent
.224 member


Reged: 08/04/05
Posts: 31
Loc: Iowa
Re: 577-450 dies needed
      12/02/06 08:37 AM

Thanks for the feedback on the press situation. I sure would prefer not to buy another press. I have 4 (two different Corbin swaging presses, one Bonanza, and one Herters). The Herters is the only one that has a chance - I'll have to check when I get home.

I think I can handle all the prime/deprime/compression chores well enough. I will have to modify a taper crimp .45-70 to work if I decide I need to crimp a little. But the killer will be the one-time resizing chore. Maybe the chamber will be sloppy enough to get around this problem.

The rifle is yet enroute and the brass is not yet ordered.

I was considering some 24 gauge Magtech shotshells that are advertied on gunbroker.com as being suitable for .577/450, but otherwise, it is Rocky Mountain Cartridge turned brass.

All loads will be black powder and all bullets paper patched.

Targets will be big and warm blooded.

Thanks a lot for the help.

Brent


Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* 577-450 dies needed Brent 11/02/06 02:08 PM
. * * Re: 577-450 dies needed AkMike   12/02/06 05:33 AM
. * * Re: 577-450 dies needed DoubleD   12/02/06 05:42 AM
. * * Re: 577-450 dies needed DarylS   12/02/06 06:21 AM
. * * Re: 577-450 dies needed Brent   12/02/06 08:37 AM
. * * Re: 577-450 dies needed DoubleD   12/02/06 04:31 PM
. * * Re: 577-450 dies needed DarylS   13/02/06 06:01 AM
. * * Re: 577-450 dies needed DoubleD   14/02/06 10:37 AM
. * * Re: 577-450 dies needed DarylS   15/02/06 04:03 AM
. * * Re: 577-450 dies needed DoubleD   15/02/06 08:01 AM
. * * Re: 577-450 dies needed DarylS   15/02/06 10:43 AM
. * * Re: 577-450 dies needed DoubleD   15/02/06 02:02 PM
. * * Re: 577-450 dies needed Brent   16/02/06 12:03 AM
. * * Re: 577-450 dies needed DoubleD   16/02/06 01:55 AM
. * * Re: 577-450 dies needed Brent   16/02/06 02:18 AM
. * * Re: 577-450 dies needed DoubleD   16/02/06 04:28 AM
. * * Re: 577-450 dies needed Brent   17/02/06 05:34 AM
. * * Re: 577-450 dies needed DoubleD   17/02/06 06:48 AM
. * * Re: 577-450 dies needed Brent   17/02/06 07:38 AM
. * * Re: 577-450 dies needed Brent   14/02/06 01:45 PM
. * * Re: 577-450 dies needed DarylS   15/02/06 04:06 AM
. * * Re: 577-450 dies needed DoubleD   14/02/06 03:52 PM
. * * Re: 577-450 dies needed Brent   12/02/06 05:38 PM
. * * Re: 577-450 dies needed DoubleD   13/02/06 02:31 AM
. * * Re: 577-450 dies needed Marrakai   12/02/06 04:48 PM
. * * Re: 577-450 dies needed DoubleD   12/02/06 12:45 AM
. * * Re: 577-450 dies needed Brent   12/02/06 05:19 AM

Extra information
0 registered and 132 anonymous users are browsing this forum.

Moderator:   



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 16137

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved