Home | Ezine | Forums | Links | Contact
NitroExpress.com: .50 Alaskan model 71 Winchester Lever

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Shooting & Reloading - Mausers, Big Bores and others >> Big Bore Rifles

DarylS
.700 member


Reged: 10/08/05
Posts: 27512
Loc: Beautiful British Columbia, Ca...
Re: .50 Alaskan model 71 Winchester Lever
      08/02/06 04:25 AM

Sectional Density A bullet's weight in pounds, divided by it's squared diameter in inches.
: Well there's enough to exit an almost all shots on Moose or bear, big or small.
: I really don't understand your post's reaoning?
: A 570gr. .510" bullet, for instance has a SD of .335.
: Even a 450gr.Cast bullet has the necessary SD (approx. .270) to exit on Moose or most bears from about any angle.
: Indeed, Horold Johnson developed this round for use on the large coastal grizzlys (brown bears) found in his guiding territory in Alaska. He used 450gr. slugs and couldn't keep on inside a big bear, not matter where shot. They were cut-off .5 BMG bullets, inverted so the base was uppermost. This left a truncated cone bullet that epenetrated as a solid, but due to the cupped nose, created exceptional wound channels. From the .450 Alaskan to the .50 Alaskan, according to Harold, was a big jump in apparent and visual effectiveness.
: If there is sufficient Section Density to achieve the necessary or desired penetration, the actual # is irrevelent. This means I had a short-form easily used formula, but cannot find it.
: Or - did you mean SD as in Standard Deviation of loads. In that respect, I got SD's in the low teens with straigth black powder, SD's in the high 20's with Pyrodex which shot poorly, an SD's in the high teens with smokeless loads using H4895 and Varget.

--------------------
Daryl


"a gun without hammers is like a Spaniel without ears" King George V

Edited by Daryl_S (08/02/06 04:28 AM)

Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* .50 Alaskan model 71 Winchester Lever DarylS 07/02/06 06:24 PM
. * * Re: .50 Alaskan model 71 Winchester Lever bonanza   08/02/06 01:08 AM
. * * Re: .50 Alaskan model 71 Winchester Lever DarylS   08/02/06 04:25 AM
. * * Re: .50 Alaskan model 71 Winchester Lever bonanza   08/02/06 05:14 AM
. * * Re: .50 Alaskan model 71 Winchester Lever BlainSmipy   17/02/06 03:06 AM
. * * Re: .50 Alaskan model 71 Winchester Lever DarylS   18/02/06 04:29 AM
. * * Re: .50 Alaskan model 71 Winchester Lever DarylS   09/02/06 02:46 AM
. * * Re: .50 Alaskan model 71 Winchester Lever BigBores   16/02/06 01:57 PM
. * * Re: .50 Alaskan model 71 Winchester Lever DarylS   17/02/06 02:16 AM
. * * Re: .50 Alaskan model 71 Winchester Lever BigBores   17/02/06 01:36 PM
. * * Re: .50 Alaskan model 71 Winchester Lever DarylS   18/02/06 02:18 AM
. * * Re: .50 Alaskan model 71 Winchester Lever 500grains   16/02/06 03:24 PM

Extra information
0 registered and 100 anonymous users are browsing this forum.

Moderator:   



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 4383

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved