Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: 458WM as 1-gun for PG/Buff w/ 350 & 500 gr. loads

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Hunting >> Hunting in Africa & hunting dangerous game

JoeR
.224 member

Reged: 19/01/04
Posts: 41

Re: 458WM as 1-gun for PG/Buff w/ 350 & 500 gr. loads
26/01/06 08:55 AM

Allen, I gotta disagree here as I am fooling around with much the same idea in a 458WM. I'm using 400gr TBBC's, factory Federal ammo which actually have a higher BC and MV than a 400gr TBBC out of my 416 Rigby (again using Federal factory ammo) which makes the 458 a fine longer distance rifle for say, eland. I plan on using 500 gr African Grand Slams on the bigger stuff, so I am hoping to get to dead on at 50 yds with the AGS's and about three inches high at 50 yds with the TBBC's. This would give me a rifle that is within three inches of POA out to about 230yds and still have the better stopping power on buff. The 458 has more energy and a flatter trajectory than the 375H&H using 300 gr bullets when comparing the Federal factory loads. A rifle that shoots as flat as the 416's with a bit of added punch available short range is appealing to me.

Post Extras

Entire topic
Subject	Posted by	Posted on
458WM as 1-gun for PG/Buff w/ 350 & 500 gr. loads	RHS	26/01/06 02:00 AM
Re: 458WM as 1-gun for PG/Buff w/ 350 & 500 gr. loads	allenday	26/01/06 07:29 AM
Re: 458WM as 1-gun for PG/Buff w/ 350 & 500 gr. loads	mikeh416Rigby	26/01/06 10:24 AM
Re: 458WM as 1-gun for PG/Buff w/ 350 & 500 gr. loads	allenday	27/01/06 02:33 AM
Re: 458WM as 1-gun for PG/Buff w/ 350 & 500 gr. loads	JPK	27/01/06 03:57 AM
Re: 458WM as 1-gun for PG/Buff w/ 350 & 500 gr. loads	DarylS	31/01/06 10:17 AM
Re: 458WM as 1-gun for PG/Buff w/ 350 & 500 gr. loads	MagnumHunter	29/01/06 03:17 PM
Re: 458WM as 1-gun for PG/Buff w/ 350 & 500 gr. loads	markhyoung	31/01/06 09:43 AM
Re: 458WM as 1-gun for PG/Buff w/ 350 & 500 gr. loads	JoeR	26/01/06 08:55 AM
Re: 458WM as 1-gun for PG/Buff w/ 350 & 500 gr. loads	DarylS	26/01/06 05:08 AM
Re: 458WM as 1-gun for PG/Buff w/ 350 & 500 gr. loads	500grains	26/01/06 02:21 AM

Extra information

0 registered and 204 anonymous users are browsing this forum.

Moderator:

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 2432

Jump to

NitroExpress.com

Home | Ezine | Forums | Links | Contact