Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: 1910 stock bedding

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Mannlicher Discussion forum & Archive

prairie_ghost
.300 member

Reged: 19/07/08
Posts: 160
Loc: casper, wy

Re: 1910 stock bedding
18/07/25 01:38 PM

Finished the bedding. I cut a mortise with the face even with the rear of the recoil lug. I checked fit and found out the recoil lug was not in contact with the wood, not even close. As suspected most if not all of the bearing surface was at the rear of the magazine box. I slowly removed wood forward in the corners of the original mortise till contact was made, ~.050. If you look at the picture you can see the corners are radiused. All radius was removed to the rear mortise to get contact. The mortise is actually square cut but the radius and shadows make it look a little rough. I made a lug out of 1" x 1/4" steel and bedded it in with a proper dimensioned shim behind it to hold it in place. Also repaired the crack behind the magazine box extending into the trigger relief. Good to go now.

Edited by prairie_ghost (18/07/25 01:45 PM)

Post Extras

Print Post

Remind Me!

Notify Moderator

Entire topic
Subject	Posted by	Posted on
1910 stock bedding	prairie_ghost	18/05/25 12:09 PM
Re: 1910 stock bedding	Rothhammer1	25/05/25 02:45 PM
Re: 1910 stock bedding	prairie_ghost	29/05/25 10:02 AM
Re: 1910 stock bedding	prairie_ghost	18/07/25 01:38 PM
Re: 1910 stock bedding	Rothhammer1	19/07/25 12:54 PM
Re: 1910 stock bedding	93x64mm	19/07/25 05:24 AM
Re: 1910 stock bedding	Marrakai	18/05/25 08:29 PM
Re: 1910 stock bedding	Rolland	19/05/25 03:42 AM
Re: 1910 stock bedding	prairie_ghost	19/05/25 05:56 AM

Extra information

0 registered and 71 anonymous users are browsing this forum.

Moderator: CptCurl

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 674

Jump to

NitroExpress.com

Powered by UBB.threads™ 6.5.5

Home | Ezine | Forums | Links | Contact

Copyright 2003 to 2011 - all rights reserved