Home | Ezine | Forums | Links | Contact
NitroExpress.com: 8x68S RWS inquiry.

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Shooting & Reloading - Mausers, Big Bores and others >> Rifles

Rolf
.333 member


Reged: 26/02/07
Posts: 409
Loc: Germany, Bavaria
Re: 8x68S RWS inquiry.
      16/01/25 12:24 AM

Hello Gentlemen,

I used an accurate 8x68S on a plains game hunt in Namibia with 200grs Accubonds for longer ranges and 200grs A-Frames upto 120 meters.

Around 10 animals were collected, one zebra at 330 meters, two wildebeest between 90 and 140 meters, two oryx at 150m and 160 meters and several sprinboks (30meters - 160 meters).
All distances were measured with a laser range finder from Leica.

If I did my job, all animals were collected with one shot.
One Accubond (of the zebra) was collected, and none of the A-Frames. However, all the exit holes were coin-sized or more and the bullet had expanded. Also the organs were damaged and not only punctured.
Damage on the near springboks was too much, and I switched to a 7x57 for the short distances.

With my limited experience I can recommend the cartridge for ranges beyond 150 meters, if you have access to the cases (available from RWS and SHM, both in Germany).

The cartridge can be used in a (Mauser) 98 system, but normally the standard magazine boxes limit the OAL to ca. 88mm.
If you want so seat out the 200grs Accubonds (which I found very helpful for precision and lowering pressures), an enlarged magazine box which permits OAL = 92mm would be an advantage.

kind reagrds
Rolf

Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* 8x68S RWS inquiry. pinotguy 04/02/07 07:50 AM
. * * Re: 8x68S RWS inquiry. Safarischorsch   12/02/07 05:54 AM
. * * Re: 8x68S RWS inquiry. pinotguy   12/02/07 08:59 AM
. * * Re: 8x68S RWS inquiry. Collath_500BPE   13/02/07 12:26 AM
. * * Re: 8x68S RWS inquiry. Collath_500BPE   13/02/07 12:29 AM
. * * Re: 8x68S RWS inquiry. Ndumo   13/02/07 08:19 AM
. * * Re: 8x68S RWS inquiry. 500Nitro   08/03/07 02:48 AM
. * * Re: 8x68S RWS inquiry. NitroXAdministrator   24/09/24 03:14 AM
. * * Re: 8x68S RWS inquiry. NitroXAdministrator   26/09/24 02:36 PM
. * * Re: 8x68S RWS inquiry. eagle27   27/09/24 07:21 AM
. * * Re: 8x68S RWS inquiry. DarylS   27/09/24 09:09 AM
. * * Re: 8x68S RWS inquiry. Rolf   16/01/25 12:24 AM
. * * Re: 8x68S RWS inquiry. NitroXAdministrator   16/01/25 10:21 PM
. * * Re: 8x68S RWS inquiry. Rolf   31/01/25 07:36 PM
. * * Re: 8x68S RWS inquiry. NitroXAdministrator   01/02/25 01:12 AM
. * * Re: 8x68S RWS inquiry. DarylS   16/01/25 07:06 AM
. * * Re: 8x68S RWS inquiry. 500Boswell   13/02/07 04:26 PM
. * * Re: 8x68S RWS inquiry. Collath_500BPE   13/02/07 05:07 PM
. * * Re: 8x68S RWS inquiry. NitroXAdministrator   14/02/07 01:33 AM
. * * Re: 8x68S RWS inquiry. Marrakai   14/02/07 02:45 PM
. * * Re: 8x68S RWS inquiry. NitroXAdministrator   16/02/07 04:22 AM
. * * Re: 8x68S RWS inquiry. Ndumo   16/02/07 06:57 AM
. * * Re: 8x68S RWS inquiry. Safarischorsch   03/03/07 07:10 AM
. * * Re: 8x68S RWS inquiry. Ndumo   07/03/07 09:07 PM
. * * Re: 8x68S RWS inquiry. Savuti_One_Shot   08/03/07 01:00 AM
. * * Re: 8x68S RWS inquiry. gunbug   02/03/07 11:51 AM
. * * Re: 8x68S RWS inquiry. DarylS   06/02/07 06:18 AM
. * * Re: 8x68S RWS inquiry. AdamTayler   04/02/07 11:12 AM
. * * Re: 8x68S RWS inquiry. Kalunga   05/02/07 06:38 AM
. * * Re: 8x68S RWS inquiry. blackberry9   05/02/07 09:57 AM

Extra information
1 registered and 11 anonymous users are browsing this forum.

Moderator:   



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 22725

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved