Quote:

---

Solder has a higher melting point than any temp. for curing Cerakote.

:"Pure Lead: it has no additives or alloys and melts at 327.5°C or 621.5°F. Lead-Antimony Alloy: because lead has been compounded with antimony, it melts at a higher temperature. Lead-Tin Alloy: generally has a low melting point range of between 183-255°C or 361-491°F based on the composition."

I am not familiar with the the glues/epoxies you are talking about.
The strongest glues I am familiar with, break adhesion at 300F.

I let Google search for me and found this JB Weld Product:
"About this product:
HighHeat is a hand mixable epoxy putty stick specifically formulated to bond and repair materials that will be exposed to high temperatures in automotive and industrial maintenance applications. It cures to a tough, hard bond with little to no shrinkage. This industrial-strength product outperforms conventional epoxy putties at high temperatures and sets in 1 hr at room temperature. After 8 hr, it can be drilled, tapped, machined, ground, filed and painted. HighHeat is rated at a tensile strength of 800 psi and cures to a machine grey in color. It is able to withstand continuous heat exposure of 400 deg F and intermittent heat exposure to 550 deg F.

---

That’s very interesting. I understand that temperature for curing cerakote has lowered over time.


The search continues…

Post Extras