Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: Ferlach reworked Mauser K98, but who was the gunsmith?

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Mauser Forum Photos & Archive

Kiwi_bloke
.333 member

Reged: 03/09/09
Posts: 256
Loc: New Zealand

Re: Ferlach reworked Mauser K98, but who was the gunsmith?
29/12/23 06:23 AM

130 grain partition and Aliant Re22.

It's a 25,1/2" barrel, so getting satisfactory velocity is not a problem, especially compared to my 20" barrel 1959 Mannlicher-Schonauer which is very fussy about powders.

The two rifles are quite different in terms of what they accept as to cartridge Over-All-Length to fit the magazine. Also, bullets will fall out of the case before they touch the lands in the Ferlacher, (using an Over-All-Length gauge), so it is somewhat over-bored. But some 130 grain bullets loaded to max SAAMI length specs will stick into the lands in the Mannlicher chamber. So it is one to be careful with.

Post Extras

Entire topic
Subject	Posted by	Posted on
Ferlach reworked Mauser K98, but who was the gunsmith?	Kiwi_bloke	27/12/23 01:04 PM
Re: Ferlach reworked Mauser K98, but who was the gunsmith?	Kiwi_bloke	27/12/23 01:13 PM
Re: Ferlach reworked Mauser K98, but who was the gunsmith?	DarylS	28/12/23 12:02 PM
Re: Ferlach reworked Mauser K98, but who was the gunsmith?	Kiwi_bloke	29/12/23 06:23 AM
Re: Ferlach reworked Mauser K98, but who was the gunsmith?	Kiwi_bloke	29/12/23 06:29 AM
Re: Ferlach reworked Mauser K98, but who was the gunsmith?	sharps4590	29/12/23 11:26 PM
Re: Ferlach reworked Mauser K98, but who was the gunsmith?	Igorrock	30/12/23 06:30 AM
Re: Ferlach reworked Mauser K98, but who was the gunsmith?	kuduae	31/12/23 08:08 AM
Re: Ferlach reworked Mauser K98, but who was the gunsmith?	Kiwi_bloke	01/01/24 08:50 AM
Re: Ferlach reworked Mauser K98, but who was the gunsmith?	eagle27	02/01/24 12:52 PM
Re: Ferlach reworked Mauser K98, but who was the gunsmith?	Kiwi_bloke	04/01/24 07:17 AM
Re: Ferlach reworked Mauser K98, but who was the gunsmith?	Kiwi_bloke	04/01/24 07:30 AM
Re: Ferlach reworked Mauser K98, but who was the gunsmith?	Kiwi_bloke	12/02/24 01:55 PM
Re: Ferlach reworked Mauser K98, but who was the gunsmith?	Kiwi_bloke	12/02/24 02:05 PM

Extra information

0 registered and 6 anonymous users are browsing this forum.

Moderator: CptCurl

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 2185

Jump to

NitroExpress.com

Home | Ezine | Forums | Links | Contact