Home | Ezine | Forums | Links | Contact
NitroExpress.com: M72 in 9.3x64Brenneke need loads please

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Shooting & Reloading - Mausers, Big Bores and others >> Mannlicher Discussion forum & Archive

DarylS
.700 member


Reged: 10/08/05
Posts: 26865
Loc: Beautiful British Columbia, Ca...
Re: M72 in 9.3x64Brenneke need loads please
      06/12/23 03:50 AM

Quote:

Hi guys, thank you for the links! I have scanned through them, but we are limited with components in SA. I will take a good look in the next few days.
I manage to go to the range and got the following results all with Hornady 286gr SP bullets and Remington Large rifle primers in RWS new brass:

S365 65gr @ 2109f/s
S365 66gr @ 2158f/s
S335 55gr @ 2265f/s
Norma 202 50gr @ 2011f/s
Vihta N540 50gr @ 1979f/s
Vihta N550 54gr @ 1922f/s

these are all just start loads! Looks like the S335 and Norma have potential as the loads is very low?




Those are quite a bit sub-par for starting loads, imho.
A model 96 in 9.3x57 makes just over 2,200fps with 286's quite easily. I did 2,170fps with 300's in mine with ZERO case WEB expansion on a full length sized case.
Lots of data on this thread is sub-par, even for a 9.3x62 with fairly modern powders.

Good luck with that 286gr. Hornady. Guys here have noted the blow up like 270 gr. Speers, even on deer.
Norma makes a good 286gr., as does or did RWS. The Speer Grand Spam will be decent as well as the Noslers.
If you had a die to size down .375's, that would open up the bullet availability.

--------------------
Daryl


"a gun without hammers is like a Spaniel without ears" King George V

Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* M72 in 9.3x64Brenneke need loads please Vintage_Canvas 03/12/23 04:36 PM
. * * Re: M72 in 9.3x64Brenneke need loads please 9.3x57   07/12/23 01:26 AM
. * * Re: M72 in 9.3x64Brenneke need loads please 93x64mm   04/12/23 06:46 AM
. * * Re: M72 in 9.3x64Brenneke need loads please Rule303   04/12/23 07:44 AM
. * * Re: M72 in 9.3x64Brenneke need loads please 93x64mm   05/12/23 06:47 AM
. * * Re: M72 in 9.3x64Brenneke need loads please Vintage_Canvas   05/12/23 04:05 PM
. * * Re: M72 in 9.3x64Brenneke need loads please DarylS   06/12/23 03:50 AM
. * * Re: M72 in 9.3x64Brenneke need loads please Vintage_Canvas   06/12/23 04:19 AM
. * * Re: M72 in 9.3x64Brenneke need loads please DarylS   06/12/23 08:29 AM
. * * Re: M72 in 9.3x64Brenneke need loads please 93x64mm   05/12/23 11:24 PM

Extra information
0 registered and 23 anonymous users are browsing this forum.

Moderator:  CptCurl 



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 1170

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved