Home | Ezine | Forums | Links | Contact
NitroExpress.com: M72 in 9.3x64Brenneke need loads please

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***
You are not logged in. [Login] Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Mannlicher Discussion forum & Archive
Previous thread Previous   View all threads Index   Next thread Next   Flat Mode Flat  

Vintage_Canvas
.275 member


Reged: 18/02/20
Posts: 89
Loc: Western Cape, South Africa
Re: M72 in 9.3x64Brenneke need loads please
      05/12/23 04:05 PM

Hi guys, thank you for the links! I have scanned through them, but we are limited with components in SA. I will take a good look in the next few days.
I manage to go to the range and got the following results all with Hornady 286gr SP bullets and Remington Large rifle primers in RWS new brass:

S365 65gr @ 2109f/s
S365 66gr @ 2158f/s
S335 55gr @ 2265f/s
Norma 202 50gr @ 2011f/s
Vihta N540 50gr @ 1979f/s
Vihta N550 54gr @ 1922f/s

these are all just start loads! Looks like the S335 and Norma have potential as the loads is very low?

--------------------
"the real Africa is still out there... you just need to know where to find it"

Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* M72 in 9.3x64Brenneke need loads please Vintage_Canvas 03/12/23 04:36 PM
. * * Re: M72 in 9.3x64Brenneke need loads please 9.3x57   07/12/23 01:26 AM
. * * Re: M72 in 9.3x64Brenneke need loads please 93x64mm   04/12/23 06:46 AM
. * * Re: M72 in 9.3x64Brenneke need loads please Rule303   04/12/23 07:44 AM
. * * Re: M72 in 9.3x64Brenneke need loads please 93x64mm   05/12/23 06:47 AM
. * * Re: M72 in 9.3x64Brenneke need loads please Vintage_Canvas   05/12/23 04:05 PM
. * * Re: M72 in 9.3x64Brenneke need loads please DarylS   06/12/23 03:50 AM
. * * Re: M72 in 9.3x64Brenneke need loads please Vintage_Canvas   06/12/23 04:19 AM
. * * Re: M72 in 9.3x64Brenneke need loads please DarylS   06/12/23 08:29 AM
. * * Re: M72 in 9.3x64Brenneke need loads please 93x64mm   05/12/23 11:24 PM

Extra information
0 registered and 125 anonymous users are browsing this forum.

Moderator:  CptCurl 



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 1301

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved