Home | Ezine | Forums | Links | Contact
NitroExpress.com: Problem with a #4 mk2 ***photos added***

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Shooting & Reloading - Mausers, Big Bores and others >> Rifles

Marrakai
.416 member


Reged: 09/01/03
Posts: 3652
Loc: Darwin, Top End of Australia
Re: Problem with a #4 mk2
      22/09/05 12:00 AM

Yes. it was almost certainly the sear catching the half-cock. This shows that you have excellent trigger control, Gibbs505, and that the 2-stage trigger has been ground down to a single-stage pull. This is not an unreasonable modification to perform on the smelly, but can have that annoying side-effect.

If the trigger is still 2-stage, you may have a more serious problem. Either way, replacing the cocking-piece is a simple job which will almost certainly fix the trigger.

--------------------
Marrakai
When the bull drops, the bullshit stops!
--------------------------------
www.marrakai-adventure.com.au

Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* Problem with a #4 mk2 ***photos added*** Gibbs505 21/09/05 02:35 PM
. * * Re: Problem with a #4 mk2 Marrakai   22/09/05 12:00 AM
. * * Re: Problem with a #4 mk2 Gibbs505   24/09/05 03:01 PM
. * * Re: Problem with a #4 mk2 Marrakai   25/09/05 12:02 PM
. * * Re: Problem with a #4 mk2 Gibbs505   27/09/05 02:08 PM
. * * Re: Problem with a #4 mk2 Marrakai   28/09/05 09:50 PM
. * * Re: Problem with a #4 mk2 Gibbs505   02/10/05 06:09 AM

Extra information
0 registered and 153 anonymous users are browsing this forum.

Moderator:   



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 2447

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved