Home | Ezine | Forums | Links | Contact
NitroExpress.com: Rizzini

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Double Rifles, Single Shots & Combinations >> Double Rifles

Nemo
.224 member


Reged: 16/06/23
Posts: 25
Loc: Wisconsin
Rizzini double rifle part 4
      10/07/23 03:00 PM

Thanks to all for the kind words.
We don't have a lot of pigs up here and the firearm deer hunting nearest to me is limited to shotgun and handgun.
I found out that my 26" 12ga. Beretta Ultralight (1st. year) shoots certain sabot slugs 2 holes touching around 75 yards.
I call it my poor-man's Churchill XXV paradox and it's my main hunting weapon.
I also have somewhere around 200 rounds of skeet thru it and it's still quite tight.
Definitely a keeper.

30 miles west of here is great rifle deer territory.
We also have a lot of wild turkeys just west of here, in fact one occasionally wanders thru our back yard right here on the outskirts of town.
South of here is very good pheasant hunting.

Just found out the #3 Rizzini is FAIR.
Fabbrica Armi Isidoro Rizzini
https://www.shotgunlife.com/shotguns/gun...zzini-fair.html
http://www.fair.it/eng/storia.jsp

#4:
E. Rizzini was founded in 1974 by Emilio Rizzini, brother of Battista and Isadoro Rizzini.
Now absorbed into Fausti.
Emilio's son, Fabio, is married to Barbara Fausti.
https://www.shotgunworld.com/threads/there-are-four-different-rizzinis.69662/
has a lot more detail on the whole clan.
For instance the Guerini brothers are nephews of Battista Rizzini.
Gardone seems to be one big family!

Back onto my Rizzini BR550E:

As I said, it's regulated for the Hornady 265gr FTX LeveRevolution cartridge.
I am not a big fan of the FTX bullet in the 444 Marlin.
It's too long to crimp in the cannelure and still load into the side of a Marlin.
So they cut the brass shorter in what is already a slightly capacity challenged case (IMHO).
This begs the question of why would they salivate over a bullet because of it's superior BC and then load it in a cartridge that's 100 fps slower than their main 265 FP load (the Light-Mag and the SuperFormance rounds)?

However this turns out to be a boon in the case of regulating this rifle.
I can easily turn out a LeveRev clone using full length brass and the 265FP bullet going 2240 (46 gr. H4198) and it shoots perfectly.
The SuperFormance round is a powerhouse and drives the 265FP to 2340 fps.
One would be hard pressed to duplicate this round without going +P using available powders.
This gives me some velocity and barrel time overhead to regulate a slightly heavier bullet.
There's no way I could get a 280 to go over 2300 fps but 2240 is within reason.

The nearest range where I did all my 444 shooting closed before the pandemic so further development has been slow.
I did, however, find that the original Remington 240 gr. 444 ammo shoots well and chronographs around 2230.
My clone of that round using the Hornady 240 gr XTP (44.5 gr. IMR 4198) shoot just fine too.
This would be a good deer round for the little whitetails we have.

I do have some progress on regulating the Woodleigh 280 gr. 444 FNSP bullet, which is the sentimental choice for a double in 444, but have not finalized the load yet.
I have got it up to 2180 using RL-7 and feel the next 50 fps or so will be safe.
That and the 280 A-Frame would be my big game bullets if I ever needed such.


A couple of my initial targets when sighting in the Rizzini

I stupidly had a mercury recoil reducer installed for one of those and took it right back out.
It actually made the gun hop off my shoulder after each shot.
I don't have pictures of any of the later, better, groups using the right ammo.
40 yards is all I had at this range but the gun is supposedly regulated at 40 meters.
I've got to get to a better range.

--------------------
Nemo -- Everything 44

Edited by Nemo (10/07/23 03:10 PM)

Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* Rizzini OntarioNimrod 24/04/22 08:41 AM
. * * Re: Rizzini HeymSR20   26/04/22 07:38 AM
. * * Re: Rizzini 93x64mm   18/05/22 07:27 AM
. * * Re: Rizzini DarylS   18/05/22 11:15 AM
. * * Re: Rizzini NitroXAdministrator   18/05/22 07:37 PM
. * * Re: Rizzini Louis   19/05/22 02:00 AM
. * * Re: Rizzini OntarioNimrod   19/05/22 04:02 AM
. * * Re: Rizzini NitroXAdministrator   19/05/22 03:11 PM
. * * Re: Rizzini HeymSR20   20/05/22 02:36 AM
. * * Re: Rizzini OntarioNimrod   20/05/22 04:26 AM
. * * Re: Rizzini NitroXAdministrator   20/05/22 07:09 PM
. * * Re: Rizzini degoins   20/05/22 09:21 PM
. * * Re: Rizzini NitroXAdministrator   20/05/22 10:39 PM
. * * Re: Rizzini HeymSR20   24/05/22 07:45 AM
. * * Rizzini double rifle part 1 Nemo   05/07/23 03:31 PM
. * * Re: Rizzini double rifle part 1 CptCurlAdministrator   05/07/23 08:24 PM
. * * Re: Rizzini double rifle part 1 85lc   06/07/23 01:19 AM
. * * Rizzini double rifle part 2 Nemo   06/07/23 05:15 PM
. * * Rizzini double rifle part 3 Nemo   07/07/23 07:11 PM
. * * Re: Rizzini double rifle part 3 bwanabobftw   08/07/23 08:32 AM
. * * Rizzini double rifle part 4 Nemo   10/07/23 03:00 PM
. * * Re: Rizzini double rifle part 4 mchughcb   05/09/23 05:23 AM
. * * Re: Rizzini double rifle part 4 93x64mm   05/09/23 06:27 AM
. * * Re: Rizzini double rifle part 4 85lc   05/09/23 09:17 AM
. * * Re: Rizzini double rifle part 4 Nemo   09/09/23 03:03 PM
. * * Re: Rizzini double rifle part 4 NitroXAdministrator   10/09/23 04:12 PM
. * * Re: Rizzini double rifle part 4 Nemo   11/09/23 06:14 AM
. * * Re: Rizzini double rifle part 4 DarylS   06/09/23 02:50 AM
. * * Re: Rizzini double rifle part 4 NitroXAdministrator   06/09/23 07:09 PM
. * * Re: Rizzini OntarioNimrod   12/05/22 10:19 PM
. * * Re: Rizzini Marrakai   17/05/22 08:01 AM
. * * Re: Rizzini crshelton   17/05/22 11:18 AM

Extra information
0 registered and 440 anonymous users are browsing this forum.

Moderator:  CptCurl 



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 6133

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved