Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: Reloading the 9.5x 57 MS...

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Mannlicher Discussion forum & Archive

DonZ
.300 member

Reged: 24/12/12
Posts: 120
Loc: BW

Re: Reloading the 9.5x 57 MS...
18/03/23 05:56 PM

I had planned on working on some load development for this, but I have been stymied by some tech problems with QuickLoad. I'm working with the QL development guys to get this going, but in the mean time, if anyone has a working system, I could use a little help crunching numbers.

Also slowing things is the availability of product, and some what I consider unreasonable local laws on storage quantities for powders. But I digress.

What I have in hand is:

100 Woodleigh 270 grain bullets.

1 kg of VV N160 powder. I should have checked here first and used Kuduea's N140 formula, but I fell for the VV marketing for the slower burning powder. Too late to change now.

CCI Primers

About 60 once fired brass, properly head stamped, retained from a purchase from Dorfner. Apparently, he is not offering this round anymore.

CH4D Dies. I'm a little concerned that I'm not quite getting a good grip on the bullet, even after using the roll crimp die, but that could be an mis-adjustment of the dies. Need to play there. I did make one dummy round for use as a snap cap, and feeding the round from the magazine tends to seat the round deeper. Need to fix that. May require a note to CH4D.

I also have 10 old Kynoch rounds, but I'm not sure if they are older and have corrosive primers, or if I should just fire them. What I may do is pull the projectile, dump the powder, remove the primer, and start over. But that's for later.

If anyone has any advice, I am all ears. Yes, I can play with the dies to get the dimensions in the Eley drawing... it's the powder load where I need to play.

--------------------
Honor never grows old, and honor rejoices the heart of age...

Post Extras

Print Post

Remind Me!

Notify Moderator

Entire topic
Subject	Posted by	Posted on
Reloading the 9.5x 57 MS...	AndrewS	06/07/20 12:47 AM
Re: Reloading the 9.5x 57 MS...	AndrewS	17/03/23 10:58 PM
Re: Reloading the 9.5x 57 MS...	Rothhammer1	17/03/23 11:52 PM
Re: Reloading the 9.5x 57 MS...	fjrdoc	18/03/23 08:51 AM
Re: Reloading the 9.5x 57 MS...	DarylS	18/03/23 09:21 AM
Re: Reloading the 9.5x 57 MS...	fjrdoc	18/03/23 12:02 PM
Re: Reloading the 9.5x 57 MS...	DonZ	18/03/23 05:56 PM
Re: Reloading the 9.5x 57 MS...	DarylS	19/03/23 05:41 AM
Re: Reloading the 9.5x 57 MS...	JDL	26/03/23 03:40 AM
Re: Reloading the 9.5x 57 MS...	Huvius	16/08/23 06:16 AM
Re: Reloading the 9.5x 57 MS...	Rothhammer1	17/08/23 04:58 PM
Re: Reloading the 9.5x 57 MS...	fjrdoc	17/08/23 08:11 PM
Re: Reloading the 9.5x 57 MS...	Rothhammer1	18/08/23 03:06 PM
Re: Reloading the 9.5x 57 MS...	Huvius	17/08/23 11:19 PM
Re: Reloading the 9.5x 57 MS...	Rothhammer1	18/08/23 03:20 PM
Re: Reloading the 9.5x 57 MS...	yamoon	19/08/23 01:24 AM
Re: Reloading the 9.5x 57 MS...	fjrdoc	19/08/23 07:52 AM
Re: Reloading the 9.5x 57 MS...	yamoon	28/08/23 01:17 AM
Re: Reloading the 9.5x 57 MS...	Parabola	26/04/24 02:13 AM
Re: Reloading the 9.5x 57 MS...	Waidmannsheil	26/04/24 10:51 AM
Re: Reloading the 9.5x 57 MS...	CarlsenHighway	07/07/24 07:51 PM
Re: Reloading the 9.5x 57 MS...	yamoon	16/07/24 01:24 PM
Re: Reloading the 9.5x 57 MS...	DarylS	17/07/24 07:31 AM
Re: Reloading the 9.5x 57 MS...	85lc	17/07/24 11:26 AM
Re: Reloading the 9.5x 57 MS...	yamoon	18/07/24 12:05 PM
Re: Reloading the 9.5x 57 MS...	yamoon	18/07/24 12:07 PM
Re: Reloading the 9.5x 57 MS...	Rothhammer1	16/07/24 03:04 PM
Re: Reloading the 9.5x 57 MS...	yamoon	18/07/24 12:22 PM
Re: Reloading the 9.5x 57 MS...	Rothhammer1	19/08/23 08:15 AM
Re: Reloading the 9.5x 57 MS...	fjrdoc	19/08/23 08:48 AM
Re: Reloading the 9.5x 57 MS...	Rothhammer1	19/08/23 09:31 AM
Re: Reloading the 9.5x 57 MS...	Rothhammer1	17/08/23 01:20 PM
Re: Reloading the 9.5x 57 MS...	fjrdoc	16/08/23 09:50 AM
Re: Reloading the 9.5x 57 MS...	Rothhammer1	17/08/23 01:32 PM
Re: Reloading the 9.5x 57 MS...	Rothhammer1	06/07/20 07:07 PM
Re: Reloading the 9.5x 57 MS...	AndrewS	06/07/20 11:49 PM
Re: Reloading the 9.5x 57 MS...	Rothhammer1	07/07/20 06:27 PM
Re: Reloading the 9.5x 57 MS...	DarylS	07/07/20 02:09 AM
Re: Reloading the 9.5x 57 MS...	85lc	07/07/20 02:46 AM
Re: Reloading the 9.5x 57 MS...	Rothhammer1	07/07/20 06:29 PM
Re: Reloading the 9.5x 57 MS...	93x64mm	07/07/20 09:39 PM
Re: Reloading the 9.5x 57 MS...	Rothhammer1	08/07/20 01:29 AM
Re: Reloading the 9.5x 57 MS...	85lc	08/07/20 12:36 AM
Re: Reloading the 9.5x 57 MS...	MikeRowe	07/07/20 07:58 AM
Re: Reloading the 9.5x 57 MS...	DarylS	06/07/20 01:45 AM
Re: Reloading the 9.5x 57 MS...	AndrewS	06/07/20 04:46 AM
Re: Reloading the 9.5x 57 MS...	Rothhammer1	07/07/20 12:19 PM
Re: Reloading the 9.5x 57 MS...	Huvius	06/07/20 06:24 AM
Re: Reloading the 9.5x 57 MS...	MikeRowe	06/07/20 10:09 AM
Re: Reloading the 9.5x 57 MS...	DarylS	06/07/20 10:21 AM
Re: Reloading the 9.5x 57 MS...	Huvius	06/07/20 01:39 AM

Extra information

0 registered and 157 anonymous users are browsing this forum.

Moderator: CptCurl

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 9830

Jump to

NitroExpress.com

Powered by UBB.threads™ 6.5.5

Home | Ezine | Forums | Links | Contact

Copyright 2003 to 2011 - all rights reserved