Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: Developing a Cast Bullet 404 Jeff Plinking / Practice Load

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Cast Bullets

Scrumbag
.224 member

Reged: 19/01/13
Posts: 9
Loc: Geneva, Switzerland

Developing a Cast Bullet 404 Jeff Plinking / Practice Load
22/11/22 11:24 PM

Hi folks,

I’m currently looking at ways of developing a low cost plinking load for my .404 Jeffery.

This probably means going with cast bullets. Unfortunately the chances of me ever having a location to cast my own are rather slim so it looks like resizing bullets is the way forward.

My current plan is to resize .430 commercially available cast lead bullets down to .424 and start with this 300gr which I have 100 on order:

I use .44 cal bullets from this maker for my 44 Mag lever action in 240gr RNFP and 255gr SWCGC with some decent success.

Anyway, I managed to get a .427” and a .424” for sizing down the .430” as cast bullets and I try with the 240gr and 255gr bullets. Sample of 1 so don’t so more experimentation needed but so far signs are good. These are 2 stage resized bullets:

Both seem to have some lube left, something of a crimping groove and lengthened a bit over 0.2mm (0.008”) so that bodes well (I think? Though I would welcome comments).

Next stage / decisions are:

1) decide whether to give a bit of extra lube with Liquid Alox or go the whole hog and try and home powder coat
2) See if the it is possible to get a gas check onto that 300gr Shell House Bullet

Thoughts and advice much appreciated.

Best wishes,

Scrummy

--------------------
98s: 9.3x62 & 7x64
.22s: Browning SA-22 & FN Trombone
Short-jobs: Sig P226 9mm, S&W25 .45 Colt, Colt Woodsman, S&W17

Post Extras

Print Post

Remind Me!

Notify Moderator

Entire topic
Subject	Posted by	Posted on
Developing a Cast Bullet 404 Jeff Plinking / Practice Load	Scrumbag	22/11/22 11:24 PM
Re: Developing a Cast Bullet 404 Jeff Plinking / Practice Load	lancaster	23/11/22 12:14 AM
Re: Developing a Cast Bullet 404 Jeff Plinking / Practice Load	DarylS	23/11/22 04:09 AM
Re: Developing a Cast Bullet 404 Jeff Plinking / Practice Load	93x64mm	23/11/22 06:37 AM
Re: Developing a Cast Bullet 404 Jeff Plinking / Practice Load	eagle27	23/11/22 08:40 AM
Re: Developing a Cast Bullet 404 Jeff Plinking / Practice Load	DarylS	23/11/22 02:56 PM
Re: Developing a Cast Bullet 404 Jeff Plinking / Practice Load	yamoon	07/12/22 05:40 AM
Re: Developing a Cast Bullet 404 Jeff Plinking / Practice Load	eagle27	07/12/22 10:20 AM

Extra information

0 registered and 9 anonymous users are browsing this forum.

Moderator: DarylS

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 2377

Jump to

NitroExpress.com

Powered by UBB.threads™ 6.5.5

Home | Ezine | Forums | Links | Contact

Copyright 2003 to 2011 - all rights reserved