Home | Ezine | Forums | Links | Contact
NitroExpress.com: 7mmPRC..Honrady's latest...

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Shooting & Reloading - Mausers, Big Bores and others >> Rifles

Ripp
.577 member


Reged: 19/02/07
Posts: 16072
Loc: Montana, USA
Re: 7mmPRC..Honrady's latest...
      27/10/22 03:51 AM

https://www.petersenshunting.com/editori...tm_campaign=HNT

7mm PRC - What You Need to Know
Hornady's new 7 PRC makes the case for the best 7mm ever!
Tweet
Like
E-mail
7mm PRC - What You Need to Know SEE PHOTO GALLERY
Photo Credit: Steve Rokks

October 26, 2022
By Joseph von Benedikt
Ever since the Sporting Arms and Ammunition Manufacturers’ Institute (SAAMI) published the specs for Hornady’s new 7mm PRC cartridge a few months back, the Internet has been buzzing with speculation. Now that the cartridge has officially launched, it’s time to quell the rumors, answer the questions, bust the myths, and provide the facts.

Much as it pains me to admit it, the 7mm PRC does just about everything better. I’ve been shooting, handloading for, and hunting with it for more than a half a year now, and I’m sold on it. Let’s take a look at just what the 7mm PRC is and does. Fundamentally, it’s a standard-length cartridge that fits into .30-06-length actions. However, the 7mm PRC’s case is not belted, so it’s bigger in diameter than the classic “Seven Mag.” and holds plenty of gunpowder.

7PRC-Bullet-1200x800.jpg SEE PHOTO GALLERY
Having a shorter cartridge case than a 7mm Rem. Mag. but with the same overall length, the 7mm PRC leaves a lot more “head height” for long, super-sleek high-BC bullets that protrude way out of the case mouth. This makes it ultimately compatible with the best long-range bullets on the market—without the need for custom magazine-lengthening work performed by a gunsmith.

Another critical piece to the 7mm PRC puzzle is fast-twist rifling. It’s spec’d with a rate of 1 turn every 8 inches. Enabling it to stabilize super long, aerodynamic bullets in every atmospheric condition on the planet.

ADVERTISING


Hornady blessed the 7mm PRC with the same chamber design parameters and match-grade tolerances possessed by the ultra-accurate 6.5 Creedmoor, 6.5 PRC, and .300 PRC. Likewise, factory-loaded ammunition is created to exacting, match-grade specifications. As a result, rifles chambered in 7mm PRC are almost sure to shoot well.


ADVERTISEMENT

SCROLL TO CONTINUE WITH CONTENT

Recoil is zesty in light rifles without muzzle brakes, but not intolerable. With a muzzle brake or—better yet—suppressor mounted, it’s mild. My 10-year-old daughter used it on her bear and didn’t even mention recoil.

7PRC-Bear-1200x800.jpg SEE PHOTO GALLERY
Initially, Hornady is offering three distinctly different factory loads. Most deer hunters will gravitate to the 175-grain ELD-X bullet loaded in Hornady’s Precision Hunter line. It is pushed to about 2,975 fps in 24-inch barrels, making it a top-notch long-range load for deer- to elk-size game.

Photo Gallery
See all Photos
7mm PRC - What You Need to Know
7PRC-Bullet-1200x800.jpg
I gravitate to the brand-new, designed-for-the-cartridge 160-grain monometal CX 7mm bullet in Hornady’s Outfitter ammo line. Outfitter cartridges are outstanding for use in the harshest climates and on anything bigger than deer.

Although it will never completely replace the grand old 7mm Rem. Mag., and may never overshadow the super-popular 28 Nosler, the 7mm PRC is in my opinion (and on paper) the best 7mm magnum hunting cartridge ever designed. It’s efficient. It’s ultimately compatible with the best extreme-range projectiles on the market, and as a result has unprecedented long-range reach.

Video That May Interest You
×


It’s inherently accurate—obscenely so. It pounds big-bodied game with authority. It’s well-mannered and easy to handload. It’s the ultimate turn-key solution for performance-minded open-country hunters.

--------------------
ALL MEN DIE, BUT FEW MEN TRULY LIVE..

Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* 7mmPRC..Honrady's latest... Ripp 27/10/22 02:25 AM
. * * Re: 7mmPRC..Honrady's latest... DarylS   27/10/22 03:06 AM
. * * Re: 7mmPRC..Honrady's latest... Ripp   27/10/22 04:00 AM
. * * Re: 7mmPRC..Honrady's latest... DarylS   27/10/22 04:59 AM
. * * Re: 7mmPRC..Honrady's latest... Ripp   27/10/22 05:31 AM
. * * Re: 7mmPRC..Honrady's latest... Ripp   27/10/22 05:36 AM
. * * Re: 7mmPRC..Honrady's latest... Rule303   27/10/22 09:36 AM
. * * Re: 7mmPRC..Honrady's latest... Ripp   27/10/22 11:37 PM
. * * Re: 7mmPRC..Honrady's latest... Rule303   28/10/22 08:02 AM
. * * Re: 7mmPRC..Honrady's latest... DarylS   28/10/22 01:35 PM
. * * Re: 7mmPRC..Honrady's latest... Rule303   29/10/22 07:32 AM
. * * Re: 7mmPRC..Honrady's latest... tinker   28/10/22 05:01 PM
. * * Re: 7mmPRC..Honrady's latest... NitroXAdministrator   29/10/22 02:46 AM
. * * Re: 7mmPRC..Honrady's latest... tinker   29/10/22 04:29 AM
. * * Re: 7mmPRC..Honrady's latest... Ripp   29/10/22 05:54 AM
. * * Re: 7mmPRC..Honrady's latest... tinker   29/10/22 08:09 AM
. * * Re: 7mmPRC..Honrady's latest... DarylS   29/10/22 02:14 PM
. * * Re: 7mmPRC..Honrady's latest... Ripp   29/10/22 02:18 AM
. * * Re: 7mmPRC..Honrady's latest... sharps4590   28/10/22 10:51 PM
. * * Re: 7mmPRC..Honrady's latest... Ripp   29/10/22 02:32 AM
. * * Re: 7mmPRC..Honrady's latest... sharps4590   29/10/22 11:37 PM
. * * Re: 7mmPRC..Honrady's latest... CptCurlAdministrator   30/10/22 09:23 PM
. * * Re: 7mmPRC..Honrady's latest... tinker   31/10/22 08:01 AM
. * * Re: 7mmPRC..Honrady's latest... DarylS   31/10/22 04:04 AM
. * * Re: 7mmPRC..Honrady's latest... LRF   31/10/22 07:54 AM
. * * Re: 7mmPRC..Honrady's latest... Ripp   01/11/22 03:29 AM
. * * Re: 7mmPRC..Honrady's latest... Rule303   03/11/22 10:43 AM
. * * Re: 7mmPRC..Honrady's latest... Ripp   04/11/22 06:31 AM
. * * Re: 7mmPRC..Honrady's latest... DarylS   04/11/22 10:22 AM
. * * Re: 7mmPRC..Honrady's latest... Ripp   05/11/22 02:01 AM
. * * Re: 7mmPRC..Honrady's latest... DarylS   05/11/22 03:46 AM
. * * Re: 7mmPRC..Honrady's latest... Ripp   05/11/22 04:01 AM
. * * Re: 7mmPRC..Honrady's latest... Rule303   05/11/22 08:20 AM
. * * Re: 7mmPRC..Honrady's latest... NitroXAdministrator   06/11/22 08:00 PM
. * * Re: 7mmPRC..Honrady's latest... Ripp   09/11/22 03:52 AM
. * * Re: 7mmPRC..Honrady's latest... Rule303   09/11/22 12:13 PM
. * * Re: 7mmPRC..Honrady's latest... Ripp   10/11/22 07:56 AM
. * * Re: 7mmPRC..Honrady's latest... Ripp   11/11/22 06:35 AM
. * * Re: 7mmPRC..Honrady's latest... DarylS   09/11/22 04:03 AM
. * * Re: 7mmPRC..Honrady's latest... 93x64mm   09/11/22 07:02 AM
. * * Re: 7mmPRC..Honrady's latest... DarylS   05/11/22 08:50 AM
. * * Re: 7mmPRC..Honrady's latest... Ripp   05/11/22 11:28 PM
. * * Re: 7mmPRC..Honrady's latest... NitroXAdministrator   01/11/22 12:19 PM
. * * Re: 7mmPRC..Honrady's latest... Ripp   02/11/22 12:44 AM
. * * Re: 7mmPRC..Honrady's latest... NitroXAdministrator   02/11/22 05:02 PM
. * * Re: 7mmPRC..Honrady's latest... Ripp   03/11/22 02:12 AM
. * * Re: 7mmPRC..Honrady's latest... Ripp   03/11/22 05:51 AM
. * * Re: 7mmPRC..Honrady's latest... 93x64mm   01/11/22 07:04 AM
. * * Re: 7mmPRC..Honrady's latest... 3DogMike   01/11/22 04:02 AM
. * * Re: 7mmPRC..Honrady's latest... DarylS   01/11/22 06:53 AM
. * * Re: 7mmPRC..Honrady's latest... DarylS   01/11/22 03:58 AM
. * * Re: 7mmPRC..Honrady's latest... 85lc   28/10/22 03:20 AM
. * * Re: 7mmPRC..Honrady's latest... NitroXAdministrator   27/10/22 04:51 PM
. * * Re: 7mmPRC..Honrady's latest... sharps4590   27/10/22 10:49 PM
. * * Re: 7mmPRC..Honrady's latest... Ripp   27/10/22 03:59 AM
. * * Re: 7mmPRC..Honrady's latest... Ripp   27/10/22 03:51 AM

Extra information
0 registered and 294 anonymous users are browsing this forum.

Moderator:   



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 7917

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved