Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: Reloading .470 on a Dillon

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Double Rifles, Single Shots & Combinations >> Double Rifles

k80
.333 member

Reged: 07/05/04
Posts: 314
Loc: San Antonio ,Texas, U.S.A.

Re: Reloading .470 on a Dillon
03/09/05 09:46 AM

The dies I used were Hornaday. They
have a sleve that falls below the die
that supports the case neck.I size,decap,
and clean the cases prior to using the
550 to prime,charge,seat. To crimp 375
I had to use another brand of die. I
could adjust the Hornaday to seat;but
not crimp. I like the Hornaday so I
am going to try the Lee "factory crimp"
die. Since you will be working with a
overall length 3/10 inch longer die
selection is critical. I think at one
time Dillon offered a 470 shellplate.

--------------------
Ken
San Antonio

Welcome to South Texas

Post Extras

Entire topic
Subject	Posted by	Posted on
Reloading .470 on a Dillon	LGF	27/08/05 09:33 AM
Re: Reloading .470 on a Dillon	congomike	27/08/05 02:32 PM
Re: Reloading .470 on a Dillon	k80	28/08/05 12:40 PM
Re: Reloading .470 on a Dillon	congomike	31/08/05 04:20 AM
Re: Reloading .470 on a Dillon	k80	03/09/05 09:46 AM
Re: Reloading .470 on a Dillon	k80	04/09/05 04:20 AM
Re: Reloading .470 on a Dillon	atkinson6	11/09/05 07:41 AM
Re: Reloading .470 on a Dillon	k80	19/11/05 11:25 AM

Extra information

1 registered and 328 anonymous users are browsing this forum.

Moderator: CptCurl

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 2372

Jump to

NitroExpress.com

Home | Ezine | Forums | Links | Contact