Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: My Carcano project

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Mannlicher Discussion forum & Archive

Rolland
.333 member

Reged: 31/12/06
Posts: 281
Loc: Camp Verde, AZ

Re: My Carcano project
09/07/22 10:13 AM

I did have when I initially put the gun together. I solved the problem by readjusting the latch so the rear of the magazine was positioned high enough to allow the bolt to clear the lips and still engage the cartridge.
The front of the magazine was a different problem as it was too low in the front to allow the cartridge to feed properly.
I made a "L" shaped piece similar to the one you showed in the original post and secured it with the original screw to provide a pivot point, this allowed the magazine to rotate up and back slightly using the latch cut as a pivot point on the magazine, with a spring between the upper portion of the block and trigger guard wall to provide tension and push the magazine up and back enough to allow the cartridge to line up with the feed ramp and lock into the release latch. Once this was done the magazine would slide in and latch.
I did run a ball end mill on the upper portion of the insert to match the rounded portion of the magazine and help hold in in position.
I also milled a few thousands off the bottom of the trigger guard as you might note in the photo, this did allow for a bit of room for the magazine to have room to move, not sure if it was necessary but did work.
This was a file and fit kind of exercise until things worked.
I hope this makes sense.
If you want I can take the adapter apart and send a photo.

Post Extras

Print Post

Remind Me!

Notify Moderator

Entire topic
Subject	Posted by	Posted on
My Carcano project	Rolland	20/03/22 04:45 AM
Re: My Carcano project	lancaster	20/03/22 05:18 AM
Re: My Carcano project	Rolland	20/03/22 05:40 AM
Re: My Carcano project	lancaster	20/03/22 05:47 AM
Re: My Carcano project	yumastepside	20/03/22 09:58 AM
Re: My Carcano project	260rem	20/03/22 09:59 PM
Re: My Carcano project	lancaster	21/03/22 07:16 AM
Re: My Carcano project	Rolland	08/07/22 10:46 AM
Re: My Carcano project	lancaster	08/07/22 02:58 PM
Re: My Carcano project	Rolland	09/07/22 10:13 AM
Re: My Carcano project	lancaster	09/07/22 02:47 PM
Re: My Carcano project	crshelton	09/07/22 10:44 PM
Re: My Carcano project	Rolland	10/07/22 12:12 PM
Re: My Carcano project	lancaster	10/07/22 03:51 PM
Re: My Carcano project	Rolland	11/07/22 08:49 AM

Extra information

0 registered and 30 anonymous users are browsing this forum.

Moderator: CptCurl

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 2444

Jump to

NitroExpress.com

Powered by UBB.threads™ 6.5.5

Home | Ezine | Forums | Links | Contact

Copyright 2003 to 2011 - all rights reserved