Home | Ezine | Forums | Links | Contact
NitroExpress.com: Sauer & Son 8x60 Mauser

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Shooting & Reloading - Mausers, Big Bores and others >> Mauser Discussion Forum

Marrakai
.416 member


Reged: 09/01/03
Posts: 3500
Loc: Darwin, Top End of Australia
Re: Sauer & Son 8x60 Mauser
      08/07/22 11:20 PM

Ha! Like your BSW my Type B Mauser would probably mike around .323 for the first few cm too,
but unlike your BSW its solely due to throat erosion!!

Anyone looking down the bore of that Mauser would likely consider it a write-off, but it shoots one-hole groups off the bench at 50m with iron sights, probably due to the squeeze-bore effect!

A digression, but I am considering opening up the chamber-necks on a couple of the Lee Enfields in my collection with cordite-eroded throats, to shoot .318 8mm bullets swaged-down to ~.315, hoping for similar results!
Already bought the .318 bullets...

--------------------
Marrakai
When the bull drops, the bullshit stops!
--------------------------------
www.marrakai-adventure.com.au

Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* Sauer & Son 8x60 Mauser tact1 07/07/22 11:13 AM
. * * Re: Sauer & Son 8x60 Mauser Huvius   07/07/22 11:39 AM
. * * Re: Sauer & Son 8x60 Mauser Marrakai   07/07/22 11:48 AM
. * * Re: Sauer & Son 8x60 Mauser Marrakai   07/07/22 11:50 AM
. * * Re: Sauer & Son 8x60 Mauser 85lc   07/07/22 01:16 PM
. * * Re: Sauer & Son 8x60 Mauser Marrakai   08/07/22 11:20 PM
. * * Re: Sauer & Son 8x60 Mauser lancaster   09/07/22 02:33 AM
. * * Re: Sauer & Son 8x60 Mauser tact1   01/08/22 12:44 AM

Extra information
0 registered and 67 anonymous users are browsing this forum.

Moderator:  NitroX 



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 1748

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved