Home | Ezine | Forums | Links | Contact
NitroExpress.com: 1936 vintage Rigby in .275HV

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Shooting & Reloading - Mausers, Big Bores and others >> Mauser Forum Photos & Archive

3DogMike
.400 member


Reged: 29/01/15
Posts: 1465
Loc: Western Slope, Colorado USA
Re: 1936 vintage Rigby in .275HV
      25/05/22 06:31 AM

Quote:

To me, this action and barrel lack all the earmarks of a 1930s Mauser, Oberndorf commercial action:
I have yet to see an original 1930s commercial action with a round instead of teardrop bolthandle and a short striker nut, features that appear on late commercial actions from 1940 to 1945 only.
The serial number 1124 does not fit into the Mauser commercial sequence. A 1930s Mauser number would be in the 110000 to 116000 range. Such a Mauser number would be on the underside of the receiver, behind the recoil lug, on all commercial actions sold to other gunmakers. Here the receiver lacks the typical script G or Q worker’s and the ornate K marks usually found on such actions. Instead, there is a plethora of worker’s marks as usually found on receivers made by the government arsenals up to WW1. Then there is a German civilian crown/U view mark under the front end of the receiver ring.
The barrel dimensions in mm are marked on the barrel at right angles. The Mauser factory put this information on lengthwise.
As it is a standard length large ring action, it is a Gewehr 98 action left over from WW1 production, likely barreled in Suhl and bought in by Rigby from a source other than Mauser. The “commercial” appearing triggerguard does not change my opinion as it is just a matter of filing to reshape a rough military undermetal to this form, a common feature of Suhl made Mausers.



kuduae,
This is very interesting and informative, thanks for adding this.
A question then: the left action siderail has no markings at all, but with a thumb cutout. If a Gewehr 98 WW1 production would this mean that the action bypassed the step in fabrication/acceptance where it would have been stamped "Gew 98" or similar? Could this have later been ground/polished off by Rigby or their supplier?
My 1930's made Cogswell and Harrison M98 also has no action markings save the (Vickers?) serial number and London View stamp.
The smaller parts (bolt, bolt shroud, bolt stop, etc are all stamped with the last two digits "23" of the "1123" upper stamp on the receiver ring found above the Rigby serial number "5628".
I believe the mentioned German crown/U view mark under the front of the receiver ring is actually the London crown/V view mark the same as with the London proof marks on the barrel?

All very historically interesting.
- Mike

--------------------
"Will Rogers never met a fighter pilot"
- Anon

“Always carry a flask of whiskey in case of snakebite, and furthermore always carry a small snake."
-- W. C. Fields

Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* 1936 vintage Rigby in .275HV 3DogMike 19/05/22 12:58 PM
. * * Re: 1936 vintage Rigby in .275HV Huvius   19/05/22 01:39 PM
. * * Re: 1936 vintage Rigby in .275HV Ripp   25/05/22 11:59 PM
. * * Re: 1936 vintage Rigby in .275HV 3DogMike   26/05/22 01:17 AM
. * * Re: 1936 vintage Rigby in .275HV Ripp   26/05/22 01:25 AM
. * * Re: 1936 vintage Rigby in .275HV bouldersmith   26/05/22 01:55 AM
. * * Re: 1936 vintage Rigby in .275HV kuduae   26/05/22 03:10 AM
. * * Re: 1936 vintage Rigby in .275HV 3DogMike   20/05/22 03:59 AM
. * * Re: 1936 vintage Rigby in .275HV degoins   20/05/22 04:49 AM
. * * Re: 1936 vintage Rigby in .275HV 3DogMike   21/05/22 04:06 AM
. * * Re: 1936 vintage Rigby in .275HV 3DogMike   21/05/22 06:19 AM
. * * Re: 1936 vintage Rigby in .275HV 93x64mm   21/05/22 06:39 AM
. * * Re: 1936 vintage Rigby in .275HV prairie_ghost   21/05/22 09:41 AM
. * * Re: 1936 vintage Rigby in .275HV eagle27   21/05/22 11:07 AM
. * * Re: 1936 vintage Rigby in .275HV degoins   21/05/22 11:22 PM
. * * Re: 1936 vintage Rigby in .275HV degoins   21/05/22 11:24 PM
. * * Re: 1936 vintage Rigby in .275HV prairie_ghost   22/05/22 12:13 AM
. * * Re: 1936 vintage Rigby in .275HV bouldersmith   22/05/22 11:33 PM
. * * Re: 1936 vintage Rigby in .275HV DORLEAC   23/05/22 04:34 PM
. * * Re: 1936 vintage Rigby in .275HV 3DogMike   24/05/22 01:36 AM
. * * Re: 1936 vintage Rigby in .275HV DORLEAC   24/05/22 09:19 PM
. * * Re: 1936 vintage Rigby in .275HV Marrakai   24/05/22 11:35 PM
. * * Re: 1936 vintage Rigby in .275HV 3DogMike   25/05/22 12:18 AM
. * * Re: 1936 vintage Rigby in .275HV kuduae   25/05/22 04:06 AM
. * * Re: 1936 vintage Rigby in .275HV Waidmannsheil   31/05/22 07:45 PM
. * * Re: 1936 vintage Rigby in .275HV 3DogMike   01/06/22 09:37 AM
. * * Re: 1936 vintage Rigby in .275HV kuduae   25/05/22 04:49 AM
. * * Re: 1936 vintage Rigby in .275HV 3DogMike   25/05/22 06:31 AM
. * * Re: 1936 vintage Rigby in .275HV kuduae   25/05/22 08:57 AM
. * * Re: 1936 vintage Rigby in .275HV 3DogMike   25/05/22 12:45 PM
. * * Re: 1936 vintage Rigby in .275HV kuduae   25/05/22 06:12 PM
. * * Re: 1936 vintage Rigby in .275HV 3DogMike   25/05/22 11:06 PM
. * * Re: 1936 vintage Rigby in .275HV bouldersmith   25/05/22 11:16 PM
. * * Re: 1936 vintage Rigby in .275HV DORLEAC   25/05/22 11:25 PM
. * * Re: 1936 vintage Rigby in .275HV DORLEAC   25/05/22 11:16 PM
. * * Re: 1936 vintage Rigby in .275HV kuduae   25/05/22 08:17 AM
. * * Re: 1936 vintage Rigby in .275HV kuduae   25/05/22 06:30 AM
. * * Re: 1936 vintage Rigby in .275HV NitroXAdministrator   24/05/22 03:02 AM
. * * Re: 1936 vintage Rigby in .275HV bwanabobftw   24/05/22 09:49 AM
. * * Re: 1936 vintage Rigby in .275HV NitroXAdministrator   24/05/22 07:43 PM
. * * Re: 1936 vintage Rigby in .275HV NitroXAdministrator   19/05/22 11:38 PM
. * * Re: 1936 vintage Rigby in .275HV Louis   20/05/22 02:23 AM
. * * Re: 1936 vintage Rigby in .275HV degoins   19/05/22 09:36 PM
. * * Re: 1936 vintage Rigby in .275HV 3DogMike   20/05/22 03:50 AM

Extra information
0 registered and 178 anonymous users are browsing this forum.

Moderator:  CptCurl 



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 7431

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved