Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: Reloading .470 on a Dillon

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Double Rifles, Single Shots & Combinations >> Double Rifles

congomike
.224 member

Reged: 20/04/03
Posts: 14

Re: Reloading .470 on a Dillon
27/08/05 02:32 PM

I regularly load my .416 Rigby on my Dillon AT500. Same as a 550B, but I don't use an automatic powder measure, although I do use automatic primer feed. The only problem you will have is you will probably need to have a current shell plate machined to accept the .470. Also you might want to get a set of Dillon lock rings to use on your dies as they are smaller diameter and don't rub against one another when you are putting the dies in the die holder.
You can send a PM to me if you want any further detail on how I did anything. Hope this helps a bit.

Post Extras

Entire topic
Subject	Posted by	Posted on
Reloading .470 on a Dillon	LGF	27/08/05 09:33 AM
Re: Reloading .470 on a Dillon	congomike	27/08/05 02:32 PM
Re: Reloading .470 on a Dillon	k80	28/08/05 12:40 PM
Re: Reloading .470 on a Dillon	congomike	31/08/05 04:20 AM
Re: Reloading .470 on a Dillon	k80	03/09/05 09:46 AM
Re: Reloading .470 on a Dillon	k80	04/09/05 04:20 AM
Re: Reloading .470 on a Dillon	atkinson6	11/09/05 07:41 AM
Re: Reloading .470 on a Dillon	k80	19/11/05 11:25 AM

Extra information

0 registered and 545 anonymous users are browsing this forum.

Moderator: CptCurl

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 2472

Jump to

NitroExpress.com

Home | Ezine | Forums | Links | Contact