Home | Ezine | Forums | Links | Contact
NitroExpress.com: Question for 22-250 Rem standard or Ackley Improved version

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Shooting & Reloading - Mausers, Big Bores and others >> Rifles

93x64mm
.416 member


Reged: 07/12/11
Posts: 4200
Loc: Nth QLD Australia
Re: Question for 22-250 Rem standard or Ackley Improved version
      06/02/22 10:37 PM

Quote:


The standard 308 Win is too much / too damaging with the 150grs bullets, but loaded down to ca. 710 m/s a very fine and recoil-friendly cartridge for this small game
And: 9,3x64 with a 250grs Accubond at 800 m/s gives results, but might be on the overkill side...

best regards
Rolf




That is certainly a reduced load in your 9.3 Rolf. Even with 55gn of AR2208 or IMR4064 I get about the 2200fps or about 670m/s with a 270gn Speer - it sails through pigs & rusa deer, not much meat loss.
As to overkill.....well, just a little.

Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* Question for 22-250 Rem standard or Ackley Improved version Rolf 10/01/22 05:54 AM
. * * Re: Question for 22-250 Rem standard or Ackley Improved version NitroXAdministrator   10/01/22 10:26 AM
. * * Re: Question for 22-250 Rem standard or Ackley Improved version Rolf   23/01/22 12:14 AM
. * * Re: Question for 22-250 Rem standard or Ackley Improved version Ripp   23/01/22 02:18 AM
. * * Re: Question for 22-250 Rem standard or Ackley Improved version 260rem   23/01/22 10:49 AM
. * * Re: Question for 22-250 Rem standard or Ackley Improved version NitroXAdministrator   23/01/22 04:42 PM
. * * Re: Question for 22-250 Rem standard or Ackley Improved version Ripp   23/01/22 05:51 PM
. * * Re: Question for 22-250 Rem standard or Ackley Improved version Rolf   24/01/22 04:31 AM
. * * Re: Question for 22-250 Rem standard or Ackley Improved version NitroXAdministrator   25/01/22 06:10 PM
. * * Re: Question for 22-250 Rem standard or Ackley Improved version Ripp   26/01/22 03:59 AM
. * * Re: Question for 22-250 Rem standard or Ackley Improved version DarylS   26/01/22 04:25 AM
. * * Re: Question for 22-250 Rem standard or Ackley Improved version 260rem   26/01/22 10:23 AM
. * * Re: Question for 22-250 Rem standard or Ackley Improved version Ripp   27/01/22 03:50 AM
. * * Re: Question for 22-250 Rem standard or Ackley Improved version Rolf   06/02/22 07:56 PM
. * * Re: Question for 22-250 Rem standard or Ackley Improved version 93x64mm   06/02/22 10:37 PM
. * * Re: Question for 22-250 Rem standard or Ackley Improved version NitroXAdministrator   26/01/22 07:26 PM
. * * Re: Question for 22-250 Rem standard or Ackley Improved version 85lc   24/01/22 05:42 AM
. * * Re: Question for 22-250 Rem standard or Ackley Improved version Ripp   25/01/22 05:32 AM
. * * Re: Question for 22-250 Rem standard or Ackley Improved version NitroXAdministrator   25/01/22 04:50 PM
. * * Re: Question for 22-250 Rem standard or Ackley Improved version DarylS   25/01/22 05:37 PM
. * * Re: Question for 22-250 Rem standard or Ackley Improved version 85lc   25/01/22 10:06 AM
. * * Re: Question for 22-250 Rem standard or Ackley Improved version Ripp   23/01/22 01:33 AM
. * * Re: Question for 22-250 Rem standard or Ackley Improved version NitroXAdministrator   23/01/22 01:47 AM
. * * Re: Question for 22-250 Rem standard or Ackley Improved version DarylS   10/01/22 06:27 AM
. * * Re: Question for 22-250 Rem standard or Ackley Improved version 93x64mm   10/01/22 07:50 AM

Extra information
0 registered and 449 anonymous users are browsing this forum.

Moderator:   



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 3036

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved