Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: Scope Mounts for Winchester 300 WSM

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Rifles

HiWall
.275 member

Reged: 01/11/03
Posts: 85
Loc: Brisbane, Qld

Re: Scope Mounts for Winchester 300 WSM
08/08/05 03:10 PM

I used the standard two piece Leupolds on my Mod 70 Featherweight 300 WSM. They worked fine, but the rear base needed to be reversed so the bolt could cycle without binding, due to the shorter receiver ring.

It slightly reduced the ring spacing but I only had a 2-7x33 Leupold fitted so that was not a problem either. No problems with ejecting empty cases do to the overhanging base at the rear of the action.

Post Extras

Entire topic
Subject	Posted by	Posted on
Scope Mounts for Winchester 300 WSM	500Nitro	07/08/05 09:55 AM
Re: Scope Mounts for Winchester 300 WSM	HiWall	08/08/05 03:10 PM
Re: Scope Mounts for Winchester 300 WSM	500Nitro	08/08/05 04:45 PM
Re: Scope Mounts for Winchester 300 WSM	HiWall	09/08/05 08:33 PM
Re: Scope Mounts for Winchester 300 WSM	starman	19/09/05 07:03 PM

Extra information

0 registered and 50 anonymous users are browsing this forum.

Moderator:

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 2575

Jump to

NitroExpress.com

Home | Ezine | Forums | Links | Contact