Home | Ezine | Forums | Links | Contact
NitroExpress.com: Muzzleloader double rifle regulation starting point.

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Double Rifles, Single Shots & Combinations >> Building Double Rifles & Gunsmithing

ironoxide
.224 member


Reged: 14/08/19
Posts: 28
Loc: Poland
Muzzleloader double rifle regulation starting point.
      25/06/21 06:48 AM

I'm regulating barrels on a Pedersoli Kodiak .58 cal. The barrels are 24 inch and have 8 thou deep rifling in 1:48in twist. My favourite projectile for it is a patched round ball.

I managed to find a copy of the "Building a Double Rifle on Shotgun Actions", but it'll still be few weeks before it arrives. I also found a thread where someone mentioned locating the muzzles 40 thou nearer than breeches (center on center) is a good starting point. Originally as set by the manufacturer the muzzles were 160 thou (4mm). This was way too close. Also the barrels were bent, but this is a separate thing I'm resolving.

Does anyone with experience of regulating DRs have a suggestion what would be a good starting point?

Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* Muzzleloader double rifle regulation starting point. ironoxide 25/06/21 06:48 AM
. * * Re: Muzzleloader double rifle regulation starting point. Longknife   03/07/21 12:13 AM
. * * Re: Muzzleloader double rifle regulation starting point. crshelton   07/07/21 09:16 AM

Extra information
0 registered and 2 anonymous users are browsing this forum.

Moderator:  CptCurl 



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 1433

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved