Home | Ezine | Forums | Links | Contact
NitroExpress.com: CIL 43 mauser brass

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Shopping.NitroExpress.com >> Cartridge Collecting and Swapping

DarylS
.700 member


Reged: 10/08/05
Posts: 27000
Loc: Beautiful British Columbia, Ca...
Re: CIL 43 mauser brass
      25/03/21 05:42 AM

I found you can actually make brass out of .300 Winchester magnum brass, or .338 Win. Mag. by necking up to hold a bullet and turning the belt diameter down to the case base & trimming to length. The rim, of course, at .532" is undersized, but my rifle extracted them. They need to be sized before being loaded, in order to position the shoulder appropriately for proper headspace.

--------------------
Daryl


"a gun without hammers is like a Spaniel without ears" King George V

Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* CIL 43 mauser brass lancaster 22/03/21 04:17 AM
. * * Re: CIL 43 mauser brass 85lc   22/03/21 08:56 AM
. * * Re: CIL 43 mauser brass Viking338   22/03/21 09:03 AM
. * * Re: CIL 43 mauser brass DarylS   24/03/21 04:06 AM
. * * Re: CIL 43 mauser brass lancaster   24/03/21 03:46 PM
. * * Re: CIL 43 mauser brass eagle27   24/03/21 04:15 PM
. * * Re: CIL 43 mauser brass DarylS   25/03/21 05:42 AM
. * * Re: CIL 43 mauser brass lancaster   25/03/21 06:39 AM
. * * Re: CIL 43 mauser brass skeet2atlow8   01/04/21 11:03 AM
. * * Re: CIL 43 mauser brass DarylS   01/04/21 01:04 PM
. * * Re: CIL 43 mauser brass lancaster   23/03/21 07:45 AM
. * * Re: CIL 43 mauser brass fuhrmann   23/03/21 06:56 PM
. * * Re: CIL 43 mauser brass DarylS   22/03/21 09:20 AM

Extra information
0 registered and 3 anonymous users are browsing this forum.

Moderator:  NitroX 



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 3757

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved