Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: Ball size for a smooth bore if bore sizes slightly differ?

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Double Rifles, Single Shots & Combinations >> Paradox and Bore Guns

DarylS
.700 member

Reged: 10/08/05
Posts: 26516
Loc: Beautiful British Columbia, Ca...

Re: Ball size for a smooth bore if bore sizes slightly differ?
01/01/21 05:01 AM

With BP loads, I did not have trouble with the flame melting the plastic as I put a 2/10" hard card over-powder wad between the cup and the powder. This seemed to protect it just fine.
Seems to me, I experimented with using 2 hard cards and eliminating the lower cup with god results when using the lighter 5 dram load. With a full 6 drams of 2F GOEX, there was room for one card only. I used a folded crimp over the loads in paper or plastic cases. This was in the 12 bore.
It was the 16 bore(gun) that used brass cases and a slight roll crimp. All of these loads used standard 13 bore card and filler wads due to the thin brass.

--------------------
Daryl

"a gun without hammers is like a Spaniel without ears" King George V

Post Extras

Entire topic
Subject	Posted by	Posted on
Ball size for a smooth bore if bore sizes slightly differ?	Kynoch	29/12/20 04:07 AM
Re: Ball size for a smooth bore if bore sizes slightly differ?	tinker	29/12/20 04:52 AM
Re: Ball size for a smooth bore if bore sizes slightly differ?	lancaster	29/12/20 04:59 PM
Re: Ball size for a smooth bore if bore sizes slightly differ?	DarylS	30/12/20 10:04 AM
Re: Ball size for a smooth bore if bore sizes slightly differ?	Kynoch	31/12/20 06:28 AM
Re: Ball size for a smooth bore if bore sizes slightly differ?	DarylS	31/12/20 10:08 AM
Re: Ball size for a smooth bore if bore sizes slightly differ?	lancaster	31/12/20 05:13 PM
Re: Ball size for a smooth bore if bore sizes slightly differ?	DarylS	01/01/21 05:01 AM
Re: Ball size for a smooth bore if bore sizes slightly differ?	Kynoch	01/01/21 08:35 AM

Extra information

0 registered and 20 anonymous users are browsing this forum.

Moderator: tinker

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 2420

Jump to

NitroExpress.com

Home | Ezine | Forums | Links | Contact