Home | Ezine | Forums | Links | Contact
NitroExpress.com: Question re a .450/400 3" NE set of barrels on a Valmet DR

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Double Rifles, Single Shots & Combinations >> Double Rifles

NitroXAdministrator
.700 member


Reged: 25/12/02
Posts: 39877
Loc: Barossa Valley, South Australi...
Re: Question re a .450/400 3" NE set of barrels on a Valmet DR
      25/10/20 09:40 AM

Found the advert:

Quote:

The rifle barrels are 26” long and the gun is well balanced with a little muzzle heaviness. This is a two-barrel set with a set of 26” long 12 GA ejector barrels with screw chokes.
.
The double rifle barrel set was built by expert gunsmith John Taylor.
.
It was made by taking a set of ejector shotgun barrels and removing the shotgun tubes from the monoblock. Then a set of Douglas blanks were turned to fit and the barrels soldered to the monoblock.
.
An adjustable muzzle piece For windage adjustment and a Barrel wedge for elevation adjustment were machined and mounted.
.
There is a set of excellent Recknagel iron sights with a red bead and yellow rear notch. The sights are zeroed for 50 yards. The barrel also accepts Valmet scope mounts.
.
The rifle is very accurate and both barrels shoot to the same point at 50 yards.
.
The stock is a factory Valmet left hand stock with three interchangeable butt pads for various lengths of pull. I do have a factory right hand stock that I can substitute for the left hand stock.
.
With the double rifle barrels the gun weight 9 lb, 4 oz, perfect for this caliber.
.
This cartridge is the 450/400 3” Nitro Express cartridge. The rifle is pleasant to shoot with recoil being a heavy shove instead of a sharp jab as in high velocity magnums.
.
Included are 7 boxes of Hornady factory Ammo, (3 solids, 4 soft points). Also there are 75 once fired empties, 41 handloads with 400 grain soft points, a die set and some bullets




--------------------
John aka NitroX

...
Govt get out of our lives NOW!
"I love the smell of cordite in the morning."
"A Sharp spear needs no polish"


Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* Question re a .450/400 3" NE set of barrels on a Valmet DR NitroXAdministrator 25/10/20 09:11 AM
. * * Re: Question re a .450/400 3" NE set of barrels on a Valmet DR NitroXAdministrator   25/10/20 09:40 AM
. * * Re: Question re a .450/400 3" NE set of barrels on a Valmet DR NitroXAdministrator   25/10/20 11:38 PM
. * * Re: Question re a .450/400 3" NE set of barrels on a Valmet DR NitroXAdministrator   27/10/20 11:31 PM
. * * Re: Question re a .450/400 3" NE set of barrels on a Valmet DR NitroXAdministrator   27/10/20 11:35 PM
. * * Re: Question re a .450/400 3" NE set of barrels on a Valmet DR xausa   28/10/20 02:55 AM
. * * Re: Question re a .450/400 3" NE set of barrels on a Valmet DR 3DogMike   28/10/20 03:17 AM
. * * Re: Question re a .450/400 3" NE set of barrels on a Valmet DR NitroXAdministrator   28/10/20 04:35 AM
. * * Re: Question re a .450/400 3" NE set of barrels on a Valmet DR DarylS   05/11/20 11:05 AM
. * * Re: Question re a .450/400 3" NE set of barrels on a Valmet DR NitroXAdministrator   05/11/20 12:46 PM
. * * Re: Question re a .450/400 3" NE set of barrels on a Valmet DR DarylS   06/11/20 04:50 AM
. * * Re: Question re a .450/400 3" NE set of barrels on a Valmet DR Hunter4752001   06/11/20 01:24 PM
. * * Re: Question re a .450/400 3" NE set of barrels on a Valmet DR Tom_H   08/11/20 10:43 AM
. * * Re: Question re a .450/400 3" NE set of barrels on a Valmet DR NitroXAdministrator   13/01/21 01:37 AM
. * * Re: Question re a .450/400 3" NE set of barrels on a Valmet DR NitroXAdministrator   06/06/21 03:57 AM
. * * Re: Question re a .450/400 3" NE set of barrels on a Valmet DR Russ_Gould   26/06/21 03:26 AM
. * * Re: Question re a .450/400 3" NE set of barrels on a Valmet DR NitroXAdministrator   16/01/22 12:37 PM
. * * Re: Question re a .450/400 3" NE set of barrels on a Valmet DR NitroXAdministrator   24/05/22 10:34 PM
. * * Re: Question re a .450/400 3" NE set of barrels on a Valmet DR luv2safari   27/01/23 07:04 PM
. * * Re: Question re a .450/400 3" NE set of barrels on a Valmet DR NitroXAdministrator   10/01/21 05:56 PM
. * * Re: Question re a .450/400 3" NE set of barrels on a Valmet DR crshelton   11/01/21 01:36 AM
. * * Re: Question re a .450/400 3" NE set of barrels on a Valmet DR NitroXAdministrator   13/01/21 01:36 AM

Extra information
0 registered and 57 anonymous users are browsing this forum.

Moderator:  CptCurl 



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 6974

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved